David Dillow wrote: > On Fri, 2009-05-29 at 08:57 -0500, Dennis Nelson wrote: > >> I have tried this: >> >> options lnet networks=o2ib(eth2) >> >> Is that correct? >> > > I would think so, but someone more experienced in the Lustre o2ib LND > and iWarp should chime in on that -- I've never used iWarp, only IB. >
we also need this for iWarp: options o2iblnd map_on_demand=64 or map_on_demand=32 if you failed to startup Regards Liang > >> The client is connected to the IB fabric using a Voltaire 10 GigE line card >> on a IB switch. Has anyone tested such a configuration? Should I expect it >> to work? >> > > I don't expect that to work, unless the Voltaire is converting iWarp to > IB -- and I highly doubt that. It is more likely using EoIB to transport > the ethernet frames over the IB fabric. You will likely need a Lustre > router to sit between the two fabrics. > _______________________________________________ Lustre-discuss mailing list [email protected] http://lists.lustre.org/mailman/listinfo/lustre-discuss
