Hello Folks,
i guad probelms with the fstab entry.
The lustre filesystem doesnt startup on boot.
A mount -a after reboot start the lustre filesystem.
Whats the problem?
Is there something special with SLES11.
Here are some infos about our client configuration.
snowball003:~ # cat /etc/fstab
/dev/os/swap swap swap
defaults 0 0
/dev/os/root / reiserfs
defaults 1 1
/dev/disk/by-id/ata-HITACHI_HUA7250SBSUN500G_0938JVHU3E_GTA470P6GVHU3E-part2
/boot reiserfs acl,user_xattr 1 2
/dev/os/home /export/home reiserfs
defaults 1 2
/dev/os/opt /opt reiserfs
defaults 1 2
/dev/os/usr /usr reiserfs
defaults 1 2
/dev/os/var /var reiserfs
defaults 1 2
proc /proc proc
defaults 0 0
sysfs /sys sysfs
noauto 0 0
debugfs /sys/kernel/debug debugfs
noauto 0 0
usbfs /proc/bus/usb usbfs
noauto 0 0
devpts /dev/pts devpts
mode=0620,gid=5 0 0
192.168.103....@tcp,192.168.103....@tcp:/snowbfs
/export/scratch_snowball lustre _netdev 0 0
snowball003:~ # uname -a
Linux snowball003 2.6.27.39-0.3_lustre.1.8.2-default #1 SMP 2009-11-23
12:57:38 +0100 x86_64 x86_64 x86_64 GNU/Linux
snowball003:~ # rpm -qa | egrep "lustre|e2fs"
lustre-ldiskfs-3.0.9-2.6.27.39_0.3_lustre.1.8.2_default
kernel-source-2.6.27.39-0.3_lustre.1.8.2
kernel-default-base-2.6.27.39-0.3_lustre.1.8.2
kernel-ib-1.4.2-2.6.27.39_0.3_lustre.1.8.2_default.volt3408
kernel-default-2.6.27.39-0.3_lustre.1.8.2
kernel-ib-devel-1.4.2-2.6.27.39_0.3_lustre.1.8.2_default.volt3408
lustre-1.8.2-2.6.27.39_0.3_lustre.1.8.2_default
kernel-default-extra-2.6.27.39-0.3_lustre.1.8.2
e2fsprogs-1.41.1-13.11.1
lustre-modules-1.8.2-2.6.27.39_0.3_lustre.1.8.2_default
Thanks and regards
Matthias
_______________________________________________
Lustre-discuss mailing list
[email protected]
http://lists.lustre.org/mailman/listinfo/lustre-discuss
