Yong,
Thanks. I'll try the explicit mount option. I assume the patch will land in 2.1. Steve From: Fan Yong [mailto:[email protected]] Sent: Tuesday, January 18, 2011 10:21 PM To: [email protected] Subject: Re: [Lustre-discuss] RHEL54 / Lustre 2.0.0.1 mds_getxattr -95 errors I think you met the issues I mentioned in: http://jira.whamcloud.com/browse/ORNL-3 I have made patch for it and in testing. Before the patch landed, you can mount MDT with "-o acl" or "-o noacl" explicitly to avoid these confused messages. -- Nasf On 1/18/11 10:39 PM, CHU, STEPHEN H (ATTSI) wrote: Hi all, I recently loaded the following on my testbed to try out Lustre 2.0: One MDS - RHEL 54, Lustre 2.0 mkfs.lustre --fsname=lufs --reformat --mgs --mdt --param lov.stripesize=25M --param lov.stripecount=1 /dev/sda2 /etc/fstab = /dev/sda2 /lustre1-mgs-mds lustre rw,noauto,_netdev 0 0 One OSS - RHEL 54, Lustre 2.0 mkfs.lustre --fsname=lufs --reformat --ost --mgsnode=10.103.34.42@o2ib0 /dev/sdb mkfs.lustre --fsname=lufs --reformat --ost --mgsnode=10.103.34.42@o2ib0 /dev/sdc /etc/fstab = /dev/sdb /lustre1/ost1 lustre rw,noauto,_netdev 0 0 /dev/sdc /lustre1/ost2 lustre rw,noauto,_netdev 0 0 One Client - RHEL 54, Lustre 2.0 /etc/fstab = 10.103.34.42@o2ib0:/lufs /lustre1_fifo lustre rw,noauto,_netdev 0 0 /lustre-mgs-mds, /lustre1/ost1,2 mounted OK on MDS and OSS. /lustre1_fifo mounted OK with Client. So far so good. On Client, "cd /" and performed a "ls -l". The following messages immediately showed up: On Client Jan 18 14:04:19 bg8mo33sn kernel: LustreError: 11-0: an error occurred while communicating with 10.103.34.42@o2ib. The mds_getxattr operation failed with -95 On MDS Jan 18 14:04:19 bg8mo33lm kernel: LustreError: 20056:0:(ldlm_lib.c:2123:target_send_reply_msg()) @@@ processing error (-95) req@ffff81031427e050 x1357944885151537/t0(0) o49->af4d23bf-2d42-6e4d-6afc-353425e513af@NET_0x500000a672229_UUID:0/0 lens 448/328 e 0 to 0 dl 1295359465 ref 1 fl Interpret:/ffffffff/ffffffff rc -95/-1 All IBs between all nodes are alive and seeing each other with no problem. The client also NFS exports /lustre1_fifo via: /etc/exports = /lustre1_fifo testhost1(rw,sync,no_root_squash) After testhost1 mounted /lustre1_fifo and attempt to "mkdir test" under it, the same error messages from above showed up on the MDS and the client. "-95" as "Operation not supported on transport endpoint" but what does it mean here in this context. The same MDS/OSS/Client setup/arrangements ran fine on RHEL 5.3 and Lustre 1.8.1.1 with no errors. Appreciate any help/insight. Thanks. Steve Stephen Chu AT&T Labs CSO C5-3C03 200 Laurel Ave Middletown, NJ (732) 420-0588 [email protected] "This e-mail and any files transmitted with it are AT&T property, are confidential, and are intended solely for the use of the individual or entity to whom this email is addressed. If you are not one of the named recipient(s) or otherwise have reason to believe that you have received this message in error, please notify the sender and delete this message immediately from your computer. Any other use, retention, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited." _______________________________________________ Lustre-discuss mailing list [email protected] http://lists.lustre.org/mailman/listinfo/lustre-discuss
_______________________________________________ Lustre-discuss mailing list [email protected] http://lists.lustre.org/mailman/listinfo/lustre-discuss
