On 2011-01-21, at 13:36, Samuel Aparicio wrote:
> trying to create an ext4 lustre filesystem attached to an OSS.
> the disks being used are exported from an external disk enclosure.
> i create a raid10 set with mdadm from 16 2Tb disks, this part seems fine.
> I am able to format such an array with normal ext4, mount a filesytem etc.
> however when i try the same thing, trying to format for a lustre filesystem I
> am unable to mount the filesystem and lustre does not seem to detect it.
> the lustre format completes normally, without errors.
You are probably formatting the filesystem with an ext4 feature that is not in
the ldiskfs module you are using.
> lustre version 1.8.4
> kernel 2.6.18-194.3.1.el5_lustre.1.8.4
> disk array is a coraid SATA/AOE device which has worked fine in every other
> context
Do you have the ext4-based ldiskfs RPM installed? It is a separate download on
the download page. You can check whether the ldiskfs module installed was
based on ext3 or ext4 with the "modinfo" command:
[root]# modinfo ldiskfs
filename: /lib/modules/2.6.32.20/updates/kernel/fs/lustre-ldiskfs/ldiskfs.ko
license: GPL
description: Fourth Extended Filesystem
^^^^^^^^^^^^^^^^^^^^^^^^^^
author: Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger,
Theodore Ts'o and others
srcversion: D5D8992C8B3E6FCA6ED4FF2
depends:
vermagic: 2.6.32.20 SMP mod_unload modversions
Cheers, Andreas
--
Andreas Dilger
Principal Engineer
Whamcloud, Inc.
_______________________________________________
Lustre-discuss mailing list
[email protected]
http://lists.lustre.org/mailman/listinfo/lustre-discuss
