Hi, 
     referring to the man page of tunefs.lustre:



              * Unmount all clients of this filesystem
              * Unmount MDT and all OSTs of this filesystem
              * Run tunefs.lustre --writeconf <device> on every server
              * Mount MDT and OSTs
              * Mount clients


     It is highly recommended that you do a "--dryrun" with tunefs.lustre first 
to make sure this operation will not change the fsname, the index of OST etc , 
otherwise you will lost all your data. 


Cheers,
Lu


-----原始邮件-----
发件人: "Alfonso Pardo" <[email protected]>
发送时间: 2012年4月23日 星期一
收件人: [email protected], [email protected]
抄送:
主题: [Lustre-discuss] Unable to mount OST and client after tunefs.lustre


Hi!

I have a problem mounting the OST and clients. I have a 1.8.4 lustre filesystem 
(it is a temporal filesystem before migrate a v2.1 whamcloud), I did a 
"abort_recovery mount", after this when I tried to mount the OST I get the next 
error:

[root@OSS01 ~]# mount -v -t lustre /dev/mpath/NETAPP_OST1 /NETAPP_OST1
arg[0] = /sbin/mount.lustre
arg[1] = -v
arg[2] = -o
arg[3] = rw
arg[4] = /dev/mpath/NETAPP_OST1
arg[5] = /NETAPP_OST1
source = /dev/mpath/NETAPP_OST1 (/dev/mpath/NETAPP_OST1), target = /NETAPP_OST1
options = rw
mounting device /dev/mpath/NETAPP_OST1 at /NETAPP_OST1, flags=0 
options=device=/dev/mpath/NETAPP_OST1
warning: opening /sys/block/dm-1/queue/max_hw_sectors_kb: No such file or 
directory
/sbin/mount.lustre: unable to set tunables for /dev/mpath/NETAPP_OST1 (may 
cause reduced IO performance)
mount.lustre: mount /dev/mpath/NETAPP_OST1 at /NETAPP_OST1 failed: No such 
device or address retries left: 0
mount.lustre: mount /dev/mpath/NETAPP_OST1 at /NETAPP_OST1 failed: No such 
device or address
The target service failed to start (bad config log?) (/dev/mpath/NETAPP_OST1).

This is my config for MDS:

tunefs.lustre /data_q1/
checking for existing Lustre data: not found

tunefs.lustre FATAL: Device /data_q1/ has not been formatted with mkfs.lustre
tunefs.lustre: exiting with 19 (No such device)
[root@ia-p5-01 /]# umount /data_q1/
[root@ia-p5-01 /]# tunefs.lustre /dev/mpath/NETAPP_MDT
checking for existing Lustre data: found CONFIGS/mountdata
Reading CONFIGS/mountdata

   Read previous values:
Target:     data_q1-MDT0000
Index:      0
Lustre FS:  data_q1
Mount type: ldiskfs
Flags:      0x5
              (MDT MGS )
Persistent mount opts: iopen_nopriv,user_xattr,errors=remount-ro
Parameters: mdt.quota_type=ug mdt.group_upcall=NONE


   Permanent disk data:
Target:     data_q1-MDT0000
Index:      0
Lustre FS:  data_q1
Mount type: ldiskfs
Flags:      0x5
              (MDT MGS )
Persistent mount opts: iopen_nopriv,user_xattr,errors=remount-ro
Parameters: mdt.quota_type=ug mdt.group_upcall=NONE

exiting before disk write.

And this config for a typical OST:
tunefs.lustre /dev/mpath/NETAPP_OST1
checking for existing Lustre data: found CONFIGS/mountdata
Reading CONFIGS/mountdata

   Read previous values:
Target:     data_q1-OST0003
Index:      3
Lustre FS:  data_q1
Mount type: ldiskfs
Flags:      0x2
              (OST )
Persistent mount opts: errors=remount-ro,extents,mballoc
Parameters: mgsnode=192.168.11.32@tcp ost.quota_type=ug


   Permanent disk data:
Target:     data_q1-OST0003
Index:      3
Lustre FS:  data_q1
Mount type: ldiskfs
Flags:      0x2
              (OST )
Persistent mount opts: errors=remount-ro,extents,mballoc
Parameters: mgsnode=192.168.11.32@tcp ost.quota_type=ug

exiting before disk write.


Could you help me?


--


Alfonso Pardo Díaz

Researcher / System Administrator
c/ Sola nº 1; 10200 Trujillo, ESPAÑA
Tel: +34 927 65 93 17 Fax: +34 927 32 32 37

---------------------------- Confidencialidad: Este mensaje y sus ficheros 
adjuntos se dirige exclusivamente a su destinatario y puede contener 
información privilegiada o confidencial. Si no es vd. el destinatario indicado, 
queda notificado de que la utilización, divulgación y/o copia sin autorización 
está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje 
por error, le rogamos que nos lo comunique inmediatamente respondiendo al 
mensaje y proceda a su destrucción. Disclaimer: This message and its attached 
files is intended exclusively for its recipients and may contain confidential 
information. If you received this e-mail in error you are hereby notified that 
any dissemination, copy or disclosure of this communication is strictly 
prohibited and may be unlawful. In this case, please notify us by a reply and 
delete this email and its contents immediately. ----------------------------

<<inline: image001.png>>

_______________________________________________
Lustre-discuss mailing list
[email protected]
http://lists.lustre.org/mailman/listinfo/lustre-discuss

Reply via email to