I'm trying to set up lnet routing for our system, and it's a bit unique. I'm
not sure how to do it. I am trying to route from workstation clients to the
internal infiniband network of the cluster. Here is the setup:
Lustre router:
192.168.20.63 ib0
10.1.4.151 eth1
Client
10.1.10.209 eth0
For non-Lustre tcp on the client, addresses 10.1.0.0/16 on eth0 route through
10.1.0.1.
My lustre lnet config is as follows:
options lnet ip2nets="o2ib 192.168.20.*; tcp(eth1) 10.1.4.*; tcp(eth0)
10.1.*.*" \
routes="tcp 192.168.20.63@o2ib; o2ib 10.1.4.151@tcp"
This of course isn't working. From the router, I can lctl ping 10.1.4.151@tcp,
but the client cannot ping the router. I'm guessing the routing from
10.1.10.0/24 to 10.1.4.0/24 is causing the problem, but I don't know how to
make it work. Any suggestions?
_______________________________________________
Lustre-discuss mailing list
[email protected]
http://lists.lustre.org/mailman/listinfo/lustre-discuss
