Patrick, The CentOS version on the machines is 6.8
[lustre@hulk2 ~]$ cat /etc/redhat-release CentOS release 6.8 (Final) The kernel version that I have installed is what I found along with the lustre RPMs [lustre@amaranth3 ~]$ uname -r 2.6.32-573.12.1.el6_lustre.x86_64 And I am trying to install lustre 2.8. Should the CentOS release version be 2.7?? > On Jun 22, 2016, at 2:17 PM, Patrick Farrell <p...@cray.com> wrote: > > Well, it says to check dmesg... Though that will just list the symbols. In > general, this usually means you've got a mismatch between the version of the > kernel (or OFED) Lustre is built against and your version of either the > kernel or OFED. Given the number and locations of the mismatches, I'm > guessing it's the kernel. > > So, compare your kernel version and your Lustre RPMs. > > Regards, > - Patrick > On 06/22/2016 12:47 PM, Sangeetha Banavathi Srinivasa wrote: >> When I try modprobe lustre, I see the below errors: >> [05:44:03] root@hulk2 lustre # modprobe lustre >> WARNING: Error inserting obdclass >> (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/obdclass.ko): >> Unknown symbol in module, or unknown parameter (see dmesg) >> WARNING: Error inserting ptlrpc >> (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/ptlrpc.ko): >> Unknown symbol in module, or unknown parameter (see dmesg) >> WARNING: Error inserting fld >> (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/fld.ko): >> Unknown symbol in module, or unknown parameter (see dmesg) >> WARNING: Error inserting lmv >> (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/lmv.ko): >> Unknown symbol in module, or unknown parameter (see dmesg) >> WARNING: Error inserting fid >> (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/fid.ko): >> Unknown symbol in module, or unknown parameter (see dmesg) >> WARNING: Error inserting mdc >> (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/mdc.ko): >> Unknown symbol in module, or unknown parameter (see dmesg) >> WARNING: Error inserting lov >> (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/lov.ko): >> Unknown symbol in module, or unknown parameter (see dmesg) >> FATAL: Error inserting lustre >> (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/lustre.ko): >> Unknown symbol in module, or unknown parameter (see dmesg) >> >>> On Jun 22, 2016, at 1:44 PM, Sangeetha Banavathi Srinivasa <bsan...@vt.edu >>> <mailto:bsan...@vt.edu>> wrote: >>> >>> Hi, >>> >>> Below are the steps I executed in configuring MDS. >>> >>> 1. mkfs.lustre --fsname lustre --mdt --mgs /dev/vg00/mdt >>> 2. mkdir /mdt >>> >>> 3. mount -t lustre /dev/vg00/mdt /mdt >>> >>> I see the below error after step 3: >>> >>> mount.lustre: mount /dev/mapper/vg00-mdt1 at /mdt failed: No such device >>> Are the lustre modules loaded? >>> Check /etc/modprobe.conf and /proc/filesystems >>> [root@amaranth3 lustre]# >>> >>> >>> I tried modprobe lustre and retried mounting but it resulted in the same >>> error. Any help will be appreciated. >>> >>> >>> For your info, the lustre modules that I have installed are: >>> [root@amaranth3 lustre]# rpm -qa |grep lustre >>> lustre-osd-ldiskfs-mount-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64 >>> lustre-tests-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64 >>> lustre-modules-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64 >>> lustre-osd-ldiskfs-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64 >>> lustre-iokit-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64 >>> kernel-2.6.32-573.12.1.el6_lustre.x86_64 >>> lustre-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64 >>> >>> [root@amaranth3 lustre]# rpm -qa |grep e2fs >>> e2fsprogs-libs-1.42.13.wc5-7.el6.x86_64 >>> e2fsprogs-1.42.13.wc5-7.el6.x86_64 >>> >>> [root@amaranth3 lustre]# rpm -qa |grep libss >>> libss-1.42.13.wc5-7.el6.x86_64 >>> >>> root@amaranth3 lustre]# rpm -qa |grep libcom >>> libcom_err-1.42.13.wc5-7.el6.x86_64 >>> >>> >>> [root@amaranth3 lustre]# uname -a >>> Linux amaranth3 2.6.32-573.12.1.el6_lustre.x86_64 #1 SMP Tue Feb 23 >>> 22:41:09 PST 2016 x86_64 x86_64 x86_64 GNU/Linux >>> [root@amaranth3 lustre]# >>> >>> >>> >>> Thanks, >>> Sangeetha >> >> >> >> _______________________________________________ >> lustre-discuss mailing list >> lustre-discuss@lists.lustre.org <mailto:lustre-discuss@lists.lustre.org> >> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org >> <http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org> > > _______________________________________________ > lustre-discuss mailing list > lustre-discuss@lists.lustre.org > http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
_______________________________________________ lustre-discuss mailing list lustre-discuss@lists.lustre.org http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org