Dear,
I have setup the Lustre-git(2.9.55_45) on CentOS 7.3, but the
client(on the same multi-host IB) can't mount lustre. Can you help
me? Thank you very much.
- The server:
- mkfs.lustre --fsname=lxfs --mgs --mdt --index=0 --reformat
/dev/sda5
- mkfs.lustre --fsname=lxfs --mgsnode=10.10.146.1@o2ib1
--servicenode=10.10.146.1@o2ib1 --ost --reformat --index=1
/dev/sda6
- mount -t lustre /dev/sda5 /mnt/mdt
- mount -t lustre /dev/sda6 /mnt/ost
- mount -t lustre -v 10.10.146.1@o2ib1:/lxfs /home is OK.
- lctl list_nids
10.10.146.1@o2ib1
- lctl ping 10.10.146.2@o2ib1
12345-0@lo
12345-10.10.146.2@o2ib1
- The client:
- lctl list_nids
10.10.146.2@o2ib1
- lctl ping 10.10.146.1@o2ib1
12345-0@lo
12345-10.10.146.1@o2ib1
- mount -t lustre -v 10.10.146.1@o2ib1:/lxfs /home/
arg[0] = /sbin/mount.lustre
arg[1] = -v
arg[2] = -o
arg[3] = rw
arg[4] = 10.10.146.1@o2ib1:/lxfs
arg[5] = /home
source = 10.10.146.1@o2ib1:/lxfs (10.10.146.1@o2ib1:/lxfs),
target = /home
options = rw
mounting device 10.10.146.1@o2ib1:/lxfs at /home,
flags=0x1000000 options=device=10.10.146.1@o2ib1:/lxfs
mount.lustre: mount 10.10.146.1@o2ib1:/lxfs at /home failed:
Input/output error retries left: 0
mount.lustre: mount 10.10.146.1@o2ib1:/lxfs at /home failed:
Input/output error
Is the MGS running?
- and now on server dmesg show:
[82709.336007] Lustre: MGS: Connection restored to
792b2b21-2e57-de7d-3d8f-5e80eb6d7bf2 (at 10.10.146.2@o2ib1)
[82709.339324] mlx5_0:dump_cqe:275:(pid 22740): dump error cqe
[82709.339508] 00000000 00000000 00000000 00000000
[82709.339677] 00000000 00000000 00000000 00000000
[82709.339841] 00000000 00000000 00000000 00000000
[82709.340006] 00000000 9d005304 08000074 01f1c5d2
[82716.343333] Lustre: MGS: Received new LWP connection from
10.10.146.2@o2ib1, removing former export from same NID
[82716.343712] Lustre: MGS: Connection restored to
792b2b21-2e57-de7d-3d8f-5e80eb6d7bf2 (at 10.10.146.2@o2ib1)
- IB information:
- ibstat
CA 'mlx5_0'
CA type: MT4115
Number of ports: 1
Firmware version: 12.17.1010
Hardware version: 0
Node GUID: 0x46e3e8611f19443a
System image GUID: 0x46e3e8611f194438
Port 1:
State: Active
Physical state: LinkUp
Rate: 100
Base lid: 360
LMC: 2
SM lid: 360
Capability mask: 0x2651e84a
Port GUID: 0x46e3e8611f19443a
Link layer: InfiniBand
- ibv_devinfo
hca_id: mlx5_0
transport: InfiniBand (0)
fw_ver: 12.17.1010
node_guid: 46e3:e861:1f19:443a
sys_image_guid: 46e3:e861:1f19:4438
vendor_id: 0x02c9
vendor_part_id: 4115
hw_ver: 0x0
board_id: SGN1130110032
phys_port_cnt: 1
Device ports:
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 360
port_lid: 360
port_lmc: 0x02
link_layer: InfiniBand
- ibstatus
Infiniband device 'mlx5_0' port 1 status:
default gid: fe80:0000:0000:0000:46e3:e861:1f19:443a
base lid: 0x168
sm lid: 0x168
state: 4: ACTIVE
phys state: 5: LinkUp
rate: 100 Gb/sec (4X EDR)
link_layer: InfiniBand
-
opensm --create-config
/etc/opensm/opensm.conf
- /etc/opensm/opensm.conf has been modified:
virt enabled 2
qos TRUE
lmc 2
- Other information:
- selinux disabled
- iptables cleaned
- uname -r: 3.10.0-514.16.1.el7_lustre.x86_64
- OS: CentOS 7.3
|
_______________________________________________
lustre-discuss mailing list
lustre-discuss@lists.lustre.org
http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org