Also, you’ll need (I think?) fairly new Pis - Lustre only supports ARM64 and older ones were 32 bit.
- Patrick ________________________________ From: lustre-discuss <[email protected]> on behalf of Peter Jones <[email protected]> Sent: Wednesday, April 24, 2019 11:08:38 PM To: Andrew Elwell; [email protected] Subject: Re: [lustre-discuss] State of arm client? Andrew You will need to use 2.12.x (and 2.12.1 is in final release testing so would be a good bet if you can wait a short while) Peter From: lustre-discuss <[email protected]> on behalf of Andrew Elwell <[email protected]> Date: Wednesday, April 24, 2019 at 7:31 PM To: "[email protected]" <[email protected]> Subject: [lustre-discuss] State of arm client? Hi folks, I remember seeing a press release by DDN/Whamcloud last November that they were going to support ARM, but can anyone point me to the current state of client? I'd like to deploy it onto a raspberry pi cluster (only 4-5 nodes) ideally on raspbian for demo / training purposes. (Yes I know it won't *quite* be infiniband performance, but as it's hitting a VM based set of lustre servers, that's the least of my worries). Ideally 2.10.x, but I'd take a 2.12 client if it can talk to 2.10.x servers Many thanks Andrew
_______________________________________________ lustre-discuss mailing list [email protected] http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
