Brian, Please file a ticket in LUDOC with details of how the manual should be updated. Ideally, including a patch. :-)
Cheers, Andreas On Jul 11, 2023, at 15:39, Brad Merchant <bmerch...@cambridgecomputer.com> wrote: We recreated the issue in a test cluster and it was definitely the llog_cancel steps that caused the issue. Clients couldn't process the llog properly on new mounts and would fail. We had to completely clear the llog and --writeconf every target to regenerate it from scratch. The cluster is up and running now but I would certainly recommend at least revising that section of the manual. On Mon, Jul 10, 2023 at 5:22 PM Brad Merchant <bmerch...@cambridgecomputer.com<mailto:bmerch...@cambridgecomputer.com>> wrote: We deactivated half of 32 OSTs after draining them. We followed the steps in section 14.9.3 of the lustre manual https://doc.lustre.org/lustre_manual.xhtml#lustremaint.remove_ost After running the steps in subhead "3. Deactivate the OST." on OST0010-OST001f, new client mounts fail with the below log messages. Existing client mounts seem to function correctly but are on a bit of a ticking timebomb because they are configured with autofs. The llog_cancel steps are new to me and the issues seemed to appear after those commands were issued (can't say that 100% definitively however). Servers are running 2.12.5 and clients are on 2.14.x Jul 10 15:22:40 adm-sup1 kernel: LustreError: 26814:0:(obd_config.c:1514:class_process_config()) no device for: hydra-OST0010-osc-ffff8be5340c2000 Jul 10 15:22:40 adm-sup1 kernel: LustreError: 26814:0:(obd_config.c:2038:class_config_llog_handler()) MGC172.16.100.101@o2ib: cfg command failed: rc = -22 Jul 10 15:22:40 adm-sup1 kernel: Lustre: cmd=cf00f 0:hydra-OST0010-osc 1:osc.active=0 Jul 10 15:22:40 adm-sup1 kernel: LustreError: 15b-f: MGC172.16.100.101@o2ib: Configuration from log hydra-client failed from MGS -22. Check client and MGS are on compatible version. Jul 10 15:22:40 adm-sup1 kernel: Lustre: hydra: root_squash is set to 99:99 Jul 10 15:22:40 adm-sup1 systemd-udevd[26823]: Process '/usr/sbin/lctl set_param 'llite.hydra-ffff8be5340c2000.nosquash_nids=192.168.80.84@tcp 192.168.80.122@tcp 192.168.80.21@tcp 172.16.90.11@o2ib 172.16.100.211@o2ib 172.16.100.212@o2ib 172.16.100.213@o2ib 172.16.100.214@o2ib 172.16.100.215@o2ib 172.16.90.51@o2ib'' failed with exit code 2. Jul 10 15:22:40 adm-sup1 kernel: Lustre: Unmounted hydra-client Jul 10 15:22:40 adm-sup1 kernel: LustreError: 26803:0:(obd_mount.c:1680:lustre_fill_super()) Unable to mount (-22) _______________________________________________ lustre-discuss mailing list lustre-discuss@lists.lustre.org http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
_______________________________________________ lustre-discuss mailing list lustre-discuss@lists.lustre.org http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org