I have radio broadband via Virgin who uses the Optus network, This morning immediately on connection it hangs up. Below is the syslog entry for an attempt. Any one have any idea on why the (SIGHUP) appears at the end.... The system was rebooted same thing occurs, the old reliable phone line dialup still works though so the basic pppd operation and networking on the system works OK.
Will a packet sniffer tell me anything. I am inclined to leave it till tomorrow to debug the issue as I have found this service is not the most reliable on the planet. Oct 11 04:41:22 wolfdualp3 chat[3527]: -- got it Oct 11 04:41:22 wolfdualp3 chat[3527]: send (ATE1^M) Oct 11 04:41:22 wolfdualp3 chat[3527]: timeout set to 60 seconds Oct 11 04:41:22 wolfdualp3 chat[3527]: send (ATD*99#^M) Oct 11 04:41:22 wolfdualp3 chat[3527]: expect (CONNECT) Oct 11 04:41:22 wolfdualp3 chat[3527]: ^M Oct 11 04:41:22 wolfdualp3 chat[3527]: ATE1^M^M Oct 11 04:41:22 wolfdualp3 chat[3527]: OK^M Oct 11 04:41:22 wolfdualp3 chat[3527]: ATD*99#^M^M Oct 11 04:41:22 wolfdualp3 chat[3527]: CONNECT Oct 11 04:41:22 wolfdualp3 chat[3527]: -- got it Oct 11 04:41:22 wolfdualp3 chat[3527]: send () Oct 11 04:41:22 wolfdualp3 pppd[3526]: Serial connection established. Oct 11 04:41:22 wolfdualp3 pppd[3526]: using channel 4 Oct 11 04:41:22 wolfdualp3 pppd[3526]: Using interface ppp0 Oct 11 04:41:22 wolfdualp3 pppd[3526]: Connect: ppp0 <--> /dev/ttyUSB0 Oct 11 04:41:23 wolfdualp3 pppd[3526]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5b40ae5> <pcomp> <accomp>] Oct 11 04:41:23 wolfdualp3 pppd[3526]: rcvd [LCP ConfReq id=0xf <asyncmap 0x0> <auth chap MD5> <magic 0x125526b> <pcomp> <accomp>] Oct 11 04:41:23 wolfdualp3 pppd[3526]: sent [LCP ConfNak id=0xf <auth chap MS-v2>] Oct 11 04:41:23 wolfdualp3 pppd[3526]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x5b40ae5> <pcomp> <accomp>] Oct 11 04:41:23 wolfdualp3 pppd[3526]: rcvd [LCP ConfReq id=0x10 <asyncmap 0x0> <auth pap> <magic 0x125526b> <pcomp> <accomp>] Oct 11 04:41:23 wolfdualp3 pppd[3526]: sent [LCP ConfAck id=0x10 <asyncmap 0x0> <auth pap> <magic 0x125526b> <pcomp> <accomp>] Oct 11 04:41:23 wolfdualp3 pppd[3526]: sent [PAP AuthReq id=0x1 user="irrelevant" password=<hidden>] Oct 11 04:41:23 wolfdualp3 pppd[3526]: rcvd [LCP DiscReq id=0x11 magic=0x125526b] Oct 11 04:41:23 wolfdualp3 pppd[3526]: rcvd [PAP AuthAck id=0x1 ""] Oct 11 04:41:23 wolfdualp3 pppd[3526]: PAP authentication succeeded Oct 11 04:41:23 wolfdualp3 pppd[3526]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>] Oct 11 04:41:24 wolfdualp3 pppd[3526]: rcvd [IPCP ConfNak id=0x1 <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>] Oct 11 04:41:24 wolfdualp3 pppd[3526]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>] Oct 11 04:41:24 wolfdualp3 pppd[3526]: Hangup (SIGHUP) Oct 11 04:41:24 wolfdualp3 pppd[3526]: Modem hangup Oct 11 04:41:24 wolfdualp3 pppd[3526]: Connection terminated. Oct 11 04:41:25 wolfdualp3 pppd[3526]: Exit. Lindsay Linux now for 19 years, how time flies................. _______________________________________________ luv-main mailing list [email protected] http://lists.luv.asn.au/listinfo/luv-main
