On Thu, 25 Jul 2013 18:45:30 +1000
Brett Pemberton <[email protected]> wrote:
> On Thu, Jul 25, 2013 at 6:31 PM, Russell Coker <[email protected]>
> wrote:
>
> > Presumably the "(repairing)" string will
> > disappear as soon as the scrub finishes
>
>
> No, it won't. I forget what the string will look like, but it will
> still indicate an error.
> I did some research at the time, and determined that this wasn't a big
> deal, so cleared the error:
>
> 2013-04-12.07:35:30 zpool scrub storage
> 2013-04-12.15:35:24 zpool clear storage ada10
The scrub has completed and I now get the following output. It seems
that the status has been cleared so if it wasn't for the kernel
messages I wouldn't know which disk had the problem. I haven't run any
"clear" command, so zfs decided by itself to remove the data.
# zpool status
pool: tank
state: ONLINE
scan: scrub repaired 1.40M in 15h55m with 0 errors on Fri Jul 26
08:33:33 2013 config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
sda ONLINE 0 0 0
sdb ONLINE 0 0 0
sdc ONLINE 0 0 0
sdd ONLINE 0 0 0
errors: No known data errors
--
My Main Blog http://etbe.coker.com.au/
My Documents Blog http://doc.coker.com.au/
_______________________________________________
luv-main mailing list
[email protected]
http://lists.luv.asn.au/listinfo/luv-main
