Hi,
This is perhaps more of a networking question than Linux, but all the
devices involved are running Linux..

I have what is probably a common home setup -- an ADSL modem operating
in "pure bridge" mode, connected by ethernet to a Linux server running
pppd with the PPPoE plugin. Same linux server is providing DNS, DHCP
and NAT for other clients connected via wireless and ethernet.

This setup was running fine for many years with a Billion 7300RA ADSL
modem. I just switched it over to a newer Billion 7800NL modem in the
hope it'd provide better sync speeds on my hopeless phone line. (It
does, with some SNR tweaking)

However for some reason path MTU discovery has completely broken when
using the newer modem.
The primary Linux box is fine, but all clients (whether wired,
wireless *or even virtual*) fail to work unless I manually set their
interfaces to an mtu of 1492.

I'm pretty confused by this -- pppd was setting itself up with a 1492
mtu even on the old modem, and that managed to propagate out just
fine. The only thing that changed was the modem, but that shouldn't
affect this issue.

I'm bamboozled. Could anyone advise me on what could possibly be done
to figure out what has happened?
Or better, a way to fix it?

Investigative notes:
1) New router was switched back to standalone mode (where it does
pppoe, dhcp, nat etc) and in this mode, all clients worked fine. So
the ADSL link and ethernet ports seem OK.
2) Old router was booted up to verify settings and that stuff works OK
with it. Settings for ADSL line were similar, and stuff does work with
it. (I say settings were "similar" because the two modems have
different interfaces, and the 7800NL has some extra options not
present on the 7300RA, but I don't think they're relevant to this
issue)

Thanks in advance,
Toby

-- 
Turning and turning in the widening gyre
The falcon cannot hear the falconer
Things fall apart; the center cannot hold
Mere anarchy is loosed upon the world
_______________________________________________
luv-main mailing list
[email protected]
http://lists.luv.asn.au/listinfo/luv-main

Reply via email to