Hi Tony, I asked Richard to do it this way, specifically to only have a 1-way mirror to test to see if the filesystem itself got out of sync regardless. Jumpstart allows a 2-way to be setup prior to installation. So, we have no trouble with the install when you start with a 1-way and do the install. It appears to me that we have a resync issue when you have a 2-way mirror setup prior to the install. The reason I say this is that when you have both sides of a mirror attached during an install, we then have trouble with the first fsck, but when run manually the fsck shows no issues. However, when Richard runs the install with a 1-way mirror we don't fail.
Where do we go from here? thanks, sarah **** Tony Nguyen wrote: > Excellent. Does this mean jumpstart profile only allows 1-way mirror? > Do users need to attach second submirrors and await the resyncs? If > yes, it sounds like a bug. > > btw, use > > set md_mirror:md_resync_bufsz = 2048 or 1024 > > as suggested in the metasync man page before attaching submirrors to > improve resync performance. > > -tony > > Richard Skelton wrote: > >> Hi Sarah, >> OK I modified the jumpstart profile :- >> install_type initial_install >> system_type standalone >> partitioning explicit >> #filesys mirror:d10 c0t0d0s0 c1t4d0s0 256 / logging >> #filesys mirror:d20 c0t0d0s3 c1t4d0s3 4096 /var logging >> #filesys mirror:d30 c0t0d0s4 c1t4d0s4 4096 /usr logging >> #filesys mirror:d40 c0t0d0s5 c1t4d0s5 1536 /opt logging >> #filesys mirror:d50 c0t0d0s7 c1t4d0s7 15360 /tmp2 logging >> #filesys mirror:d60 c0t0d0s1 c1t4d0s1 free swap >> filesys mirror:d10 c0t0d0s0 256 / logging >> filesys mirror:d20 c0t0d0s3 4096 /var logging >> filesys mirror:d30 c0t0d0s4 4096 /usr logging >> filesys mirror:d40 c0t0d0s5 1536 /opt logging >> filesys mirror:d50 c0t0d0s7 15360 /tmp2 logging >> filesys mirror:d60 c0t0d0s1 free swap >> metadb c0t0d0s6 size 8192 count 4 >> metadb c1t4d0s6 size 8192 count 4 >> cluster SUNWCXall >> locale en_GB >> >> >> The install works fine now :- >> Rebooting with command: boot net - install >> Boot device: /sbus at 3,0/network at 0,100000 File and args: - install >> 38a00 Server IP address: 172.29.216.237 Client IP address: >> 172.29.216.181 SunOS Release 5.11 Version snv_19 64-bit >> Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. >> Use is subject to license terms. >> SUNW,sbus-gem0: Using Gigabit SERDES Interface >> SUNW,sbus-gem0: Auto-Negotiated 1000 Mbps Full-Duplex Link Up >> Aug 15 04:44:33 svc.startd[7]: Could not log for >> svc:/network/datalink:default: >> open(/var/svc/log//network-datalink:default.log) failed with >> Read-only file system. >> Configuring devices. >> Using RPC Bootparams for network configuration information. >> Attempting to configure interface hme0... >> WARNING: hme0: fault detected in device; service degraded >> WARNING: hme0: No response from Ethernet network : Link down -- cable >> problem? >> Skipped interface hme0 >> Attempting to configure interface ge0... >> Configured interface ge0 >> Beginning system identification... >> Searching for configuration file(s)... >> Using sysid configuration file >> 172.29.216.237:/Jump/Profiles/E3500_sysidcfg/sysidcfg >> Search complete. >> Discovering additional network configuration... >> Completing system identification... >> Starting remote procedure call (RPC) services: done. >> NIS domain name is brs.infineon.com >> System identification complete. >> Starting Solaris installation program... >> Searching for JumpStart directory... >> Using rules.ok from 172.29.216.237:/Jump/Profiles. >> Checking rules.ok file... >> Using begin script: pre_install.sh >> Using profile: E3500+mirror >> Using finish script: E3500+login.sh >> Executing JumpStart preinstall phase... >> Executing begin script "pre_install.sh"... >> Mon Aug 15 12:48:16 BST 2005 >> Begin script pre_install.sh execution completed. >> Searching for SolStart directory... >> Checking rules.ok file... >> Using begin script: install_begin >> Using finish script: patch_finish >> Executing SolStart preinstall phase... >> Executing begin script "install_begin"... >> Begin script install_begin execution completed. >> >> Processing default locales >> >> Processing profile >> - Selecting cluster (SUNWCXall) >> - Selecting locale (en_GB.ISO8859-1) >> - Selecting locale (en_GB) >> - Selecting all disks >> - Configuring boot device >> - Configuring SVM State Database Replica on (c0t0d0s6) >> - Configuring SVM State Database Replica on (c1t4d0s6) >> - Configuring SVM Mirror Volume d10 on / (c0t0d0s0) >> - Configuring SVM Mirror Volume d20 on /var (c0t0d0s3) >> - Configuring SVM Mirror Volume d30 on /usr (c0t0d0s4) >> - Configuring SVM Mirror Volume d40 on /opt (c0t0d0s5) >> - Configuring SVM Mirror Volume d50 on /tmp2 (c0t0d0s7) >> - Configuring SVM Mirror Volume d60 on swap (c0t0d0s1) >> >> Verifying disk configuration >> - WARNING: Unused disk space (c1t4d0) >> >> Verifying space allocation >> - Total software size: 3228.85 Mbytes >> >> Preparing system for Solaris install >> >> Configuring disk (c0t0d0) >> - Creating Solaris disk label (VTOC) >> >> Configuring disk (c1t4d0) >> - Creating Solaris disk label (VTOC) >> >> Creating and checking UFS file systems >> - Creating / (c0t0d0s0) >> - Creating /var (c0t0d0s3) >> - Creating /usr (c0t0d0s4) >> - Creating /opt (c0t0d0s5) >> - Creating /tmp2 (c0t0d0s7) >> >> Creating SVM Meta Devices >> - Creating SVM State Replica on disk c0t0d0s6 >> - metadb: brscs02: network/rpc/meta:default: failed to >> enable/disable SVM service >> - Creating SVM State Replica on disk c1t4d0s6 >> - metadb: waiting on /etc/lvm/lock >> - Creating SVM Mirror Volume d10 (/) >> - Creating SVM Mirror Volume d20 (/var) >> - Creating SVM Mirror Volume d30 (/usr) >> - Creating SVM Mirror Volume d40 (/opt) >> - Creating SVM Mirror Volume d50 (/tmp2) >> - Creating SVM Mirror Volume d60 (swap) >> >> Beginning Solaris software installation >> >> Starting software installation >> SUNWocfd.........................done. 3228.50 Mbytes >> remaining. >> SUNWcsu..........................done. 3214.44 Mbytes >> remaining. >> SUNWcsr..........................done. 3210.25 Mbytes >> remaining. >> . >> . >> . >> SUNWsshdu........................done. 1.68 Mbytes remaining. >> SUNWsshr.........................done. 1.57 Mbytes remaining. >> SUNWsshu.........................done. 1.00 Mbytes remaining. >> >> Completed software installation >> >> Solaris 11 software installation succeeded >> >> Customizing system files >> - Mount points table (/etc/vfstab) >> - Network host addresses (/etc/hosts) >> - Network host addresses (/etc/hosts) >> - Environment variables (/etc/default/init) >> >> Cleaning devices >> >> Customizing system devices >> - Physical devices (/devices) >> - Logical devices (/dev) >> >> Installing boot information >> - Installing boot blocks (c0t0d0s0) >> >> Installation log location >> - /a/var/sadm/system/logs/install_log (before reboot) >> - /var/sadm/system/logs/install_log (after reboot) >> >> Installation complete >> - Making SVM Mirror Volume as boot device (/dev/md/dsk/d10) >> Executing SolStart postinstall phase... >> Executing finish script "patch_finish"... >> >> >> Finish script patch_finish execution completed. >> Executing JumpStart postinstall phase... >> Executing finish script "E3500+login.sh"... >> >> Mon Aug 15 13:46:18 BST 2005 >> ******************************************************************************* >> >> >> Creating Display metat data >> >> /sbin/metastat >> metastat: brscs02: system/metainit:default >> system/mdmonitor:default >> network/rpc/meta:default: service(s) not online in SMF >> >> d60: Mirror >> Submirror 0: d61 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 19182960 blocks (9.1 GB) >> >> d61: Submirror of d60 >> State: Okay Size: 19182960 blocks (9.1 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s1 0 No Okay Yes >> >> d50: Mirror >> Submirror 0: d51 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 31458321 blocks (15 GB) >> >> d51: Submirror of d50 >> State: Okay Size: 31458321 blocks (15 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s7 0 No Okay Yes >> >> d40: Mirror >> Submirror 0: d41 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 3146121 blocks (1.5 GB) >> >> d41: Submirror of d40 >> State: Okay Size: 3146121 blocks (1.5 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s5 0 No Okay Yes >> >> d30: Mirror >> Submirror 0: d31 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 8389656 blocks (4.0 GB) >> >> d31: Submirror of d30 >> State: Okay Size: 8389656 blocks (4.0 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s4 0 No Okay Yes >> >> d20: Mirror >> Submirror 0: d21 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 8389656 blocks (4.0 GB) >> >> d21: Submirror of d20 >> State: Okay Size: 8389656 blocks (4.0 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s3 0 No Okay Yes >> >> d10: Mirror >> Submirror 0: d11 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 525798 blocks (256 MB) >> >> d11: Submirror of d10 >> State: Okay Size: 525798 blocks (256 MB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s0 0 No Okay Yes >> >> Device Relocation Information: >> Device Reloc Device ID >> c0t0d0 Yes id1,ssd at n2000002037a13604 >> Sleep!!!! >> /sbin/metastat >> metastat: brscs02: system/metainit:default >> system/mdmonitor:default >> network/rpc/meta:default: service(s) not online in SMF >> >> d60: Mirror >> Submirror 0: d61 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 19182960 blocks (9.1 GB) >> >> d61: Submirror of d60 >> State: Okay Size: 19182960 blocks (9.1 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s1 0 No Okay Yes >> >> d50: Mirror >> Submirror 0: d51 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 31458321 blocks (15 GB) >> >> d51: Submirror of d50 >> State: Okay Size: 31458321 blocks (15 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s7 0 No Okay Yes >> >> d40: Mirror >> Submirror 0: d41 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 3146121 blocks (1.5 GB) >> >> d41: Submirror of d40 >> State: Okay Size: 3146121 blocks (1.5 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s5 0 No Okay Yes >> >> d30: Mirror >> Submirror 0: d31 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 8389656 blocks (4.0 GB) >> >> d31: Submirror of d30 >> State: Okay Size: 8389656 blocks (4.0 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s4 0 No Okay Yes >> >> d20: Mirror >> Submirror 0: d21 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 8389656 blocks (4.0 GB) >> >> d21: Submirror of d20 >> State: Okay Size: 8389656 blocks (4.0 GB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s3 0 No Okay Yes >> >> d10: Mirror >> Submirror 0: d11 >> State: Okay Pass: 1 >> Read option: roundrobin (default) >> Write option: parallel (default) >> Size: 525798 blocks (256 MB) >> >> d11: Submirror of d10 >> State: Okay Size: 525798 blocks (256 MB) >> Stripe 0: >> Device Start Block Dbase State Reloc Hot Spare >> c0t0d0s0 0 No Okay Yes >> >> Device Relocation Information: >> Device Reloc Device ID >> c0t0d0 Yes id1,ssd at n2000002037a13604 >> Mon Aug 15 13:48:41 BST 2005 >> >> Finish script E3500+login.sh execution completed. >> >> The begin script log 'begin.log' >> is located in /var/sadm/system/logs after reboot. >> >> The finish script log 'finish.log' >> is located in /var/sadm/system/logs after reboot. >> >> syncing file systems... done >> rebooting... >> Resetting... Software Power ON >> 5-slot Sun Enterprise E3500, No Keyboard >> OpenBoot 3.2.30, 2048 MB memory installed, Serial #11240214. >> Copyright 2002 Sun Microsystems, Inc. All rights reserved >> Ethernet address 8:0:20:ab:83:16, Host ID: 80ab8316. >> >> >> >> Rebooting with command: boot >> >> Port#0 received soc-status=14 Port#1 received soc-status=14 loop 0 is >> ONLINE >> Boot device: disk File and args: Loading ufs-file-system package 1.4 >> 04 Aug 1995 13:02:54. FCode UFS Reader 1.13 05/06/08 08:30:31. >> Loading: /platform/SUNW,Ultra-Enterprise/ufsboot >> Loading: /platform/sun4u/ufsboot >> SunOS Release 5.11 Version snv_19 64-bit >> Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. >> Use is subject to license terms. >> SUNW,sbus-gem0: Using Gigabit SERDES Interface >> SUNW,sbus-gem0: Auto-Negotiated 1000 Mbps Full-Duplex Link Up >> Hostname: brscs02 >> Configuring devices. >> Loading smf(5) service descriptions: 130/130 >> NIS domain name is brs.infineon.com >> Aug 15 14:01:00 svc.startd[7]: Lost repository event due to >> disconnection. >> checking ufs filesystems >> /dev/md/rdsk/d50: is logging. >> /dev/md/rdsk/d40: is logging. >> Creating new rsa public/private host key pair >> Creating new dsa public/private host key pair >> >> brscs02 console login: >> >> I have run the jumpstart twice and got the above results. >> >> What next :-) >> >> Cheers >> Richard. >> This message posted from opensolaris.org >> _______________________________________________ >> lvm-discuss mailing list >> lvm-discuss at opensolaris.org > > > _______________________________________________ > lvm-discuss mailing list > lvm-discuss at opensolaris.org
