Ok, I may just be overlooking something small but here is my setup:
---------------- ----------------
: ld1 :--HB--: ld2 : <-----
directors and ld1 is a gateway
---------------- ----------------
| |
<---- Virtual IP: 1.2.3.4 and ld1 GWip: 192.168.0.1
-------------------------------------------------------
| | | | |
RS1 RS2 RS3 RS4 RS5...
Failover is working properly for the VIP and the GWip but here is the
problem. When I failover from ld1 to ld2 I can no longer get a response
from the RSs. I can login to each RS and get out just fine to anything
so I know the GWip took fine and they can still route through it but for
some reason the HTTP requests trying to come through once failed-over
are not being sent to the RS. I have verified this through doing
"tcpdump -n -i eth0 port 80" on the RSs while trying to access the test
page I have setup. As soon as I fail back over to ld1 the connections
continue. I was thinking that it was some kind of ARP related issue but
to test that theory I went to each server after failover to ld2 and
cleared the ARP entry for the GWip. Anybody have any ideas? This is
the only thing keeping me from having a working setup. Thanks in advance!
--
Regards,
James Bowling <[EMAIL PROTECTED]>
Director of Network Operations
Alchemy Communications, Inc.
818-206-9260 x4043
_______________________________________________
LinuxVirtualServer.org mailing list - [email protected]
Send requests to [EMAIL PROTECTED]
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
