Check your web server logs. You should see the request for the
testServices.cfm in the access logs.
Dan Baughman wrote:
I have a fairfly simple lvs conf. One linux LB, two 2k3 real servers.
Works
great. Now I want to enable teh fail over.
Did a little homework, was intimidated by the length of the keepalived
conf
files, so went with ldirectord. Came up with this as a cf file.
I run ldirectord start, and the log file doesn't get any entries
indicating
a successful start, and I dont see any thing indicating the testing is
actually taking place. Other than simulating a fail on a server, how
can I
verifty the ldirector is monitoring? If i throw bogus arguments at
it, it
does generate error messages in the log file, so I think i'm looking
at the
right file. Anyone already have this figured out?
# Global Directives
checktimeout=10
checkinterval=2
#fallback=127.0.0.1:80
autoreload=no
#logfile="/var/log/ldirectord.log"
logfile="local0"
quiescent=yes
# Virtual Server for HTTP
virtual=63.247.194.221:80
real=63.247.194.210:80 masq
service=http
request="testServices.cfm"
receive="success"
scheduler=rr
#persistent=600
protocol=tcp
checktype=negotiate
# Virtual Server for HTTP
virtual=63.247.194.222:80
real=63.247.194.210:80 masq
service=http
request="testServices.cfm"
receive="success"
scheduler=rr
#persistent=600
protocol=tcp
checktype=negotiate
_______________________________________________
LinuxVirtualServer.org mailing list - [email protected]
Send requests to [EMAIL PROTECTED]
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
--
Regards,
James Bowling <[EMAIL PROTECTED]>
Director of Network Operations
Alchemy Communications, Inc.
818-206-9260 x4043
_______________________________________________
LinuxVirtualServer.org mailing list - [email protected]
Send requests to [EMAIL PROTECTED]
or go to http://www.in-addr.de/mailman/listinfo/lvs-users