Hi everybody i try to configure ldirectord in order to build a load balancing cluster.
i used the following link to do it: http://www.ultramonkey.org/3/topologies/lb-eg.html my ldirectord.conf # Global Directives checktimeout=10 checkinterval=2 #fallback=127.0.0.1:80 autoreload=no logfile="/var/log/ldirectord.log" logfile="local0" emailalert="[EMAIL PROTECTED]" emailalertfreq=5 emailalertstatus=all quiescent=yes # Sample for an http virtual service virtual=192.168.1.64:80 fallback=127.0.0.1:80 real=192.168.1.65:80 masq real=192.168.1.66:80 masq service=http request="index.html" #receive="Test Page" #virtualhost=some.domain.com.au scheduler=rr #persistent=600 #netmask=255.255.255.255 protocol=tcp checktype=on #checkport=80 #request="index.html" #receive="Test Page" #virtualhost=www.x.y.z ldirectord is running but i don't know why it didn't create the Virtual IP # /sbin/ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:19:db:75:d2:27 brd ff:ff:ff:ff:ff:ff inet 192.168.1.66/24 brd 192.168.1.255 scope global eth0 *****normally here there will be the virtaul IP************ inet6 fe80::219:dbff:fe75:d227/64 scope link valid_lft forever preferred_lft forever 3: sit0: <NOARP> mtu 1480 qdisc noop link/sit 0.0.0.0 brd 0.0.0.0 Thanks and Best Regards Abraham OLIVARES --------------------------------- ¡Sé un mejor ambientalista! Encuentra consejos para cuidar el lugar donde vivimos en: http://mx.yahoo.com/promos/mejorambientalista.html _______________________________________________ LinuxVirtualServer.org mailing list - [email protected] Send requests to [EMAIL PROTECTED] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
