Thought. The lvs might not be working due to ingress filtering. Check the logs.
In your case I would suggest you try LVS-NAT as oppose to DR because DR rewrite the mac address and as far as I know that wouldn't work for you. The machines are not on the same network hence mac address rewrite wouldn't work. Why don't you try LVS-Tun. The real servers will still be invisible from the internet and they can use the outgoing bandwidth of the remote site. Even incase of LVS-Tun you will have to make sure that ingress filtering is not blocking out bound traffic. Sameer On Dec 29, 2007 4:53 AM, William Ottley <[EMAIL PROTECTED]> wrote: > Hey Joseph, thanks for responding. I have a strong suspicion, that it > has to do with VPN. See, if you notice the real servers are on a > different network, which is .3.10 and .4.10 These are reachable via a > site-to-site vpn connection. Now I use the howto at: > > http://www.austintek.com/LVS/LVS-HOWTO/mini-HOWTO/LVS-mini-HOWTO.html > (5. Example: Setup LVS using LVS-DR forwarding) > > and well it tells me to make sure the gw for the realservers are > pointing to the LVS VIP, which in my case is 192.168.2.100, but i > can't do that, since the real server's GW is pointing to another > firewall, which creates the VPN... > > I'm sooo confused as to what process to use > > See, we need to "hide" all of the webservers from the internet, and > have all traffic go through one location, which is where the Load > Balancer is. The Load Balancer is behind a firewall, so, I'm told its > an LVS-Direct setup, and not an LVS-NAT... or am I wrong? > > > Or am i doing this the wrong way? > Should I just have a secure LVS / Firewall, and do IP Tunneling? Does > this "hide" where the other web servers are? > > Thanks! > > William > > > On Dec 28, 2007 5:11 PM, Joseph Mack NA3T <[EMAIL PROTECTED]> wrote: > > On Fri, 28 Dec 2007, William Ottley wrote: > > > > > Hello all, > > > I've read the how-tos, and i'm still confused. I have a really simple > > > setup, yet, i can't get my lvs up and running. > > > > you could try working through the setup in the mini-HOWTO. > > Unfortunately it assumes Julian's hidden patch for the > > realservers rather than arp_ignore. You could substitute the > > instructions > > > > Alternately you could read my comments on pirahna inthe > > HOWTO > > > > Joe > > > > -- > > Joseph Mack NA3T EME(B,D), FM05lw North Carolina > > jmack (at) wm7d (dot) net - azimuthal equidistant map > > generator at http://www.wm7d.net/azproj.shtml > > Homepage http://www.austintek.com/ It's GNU/Linux! > > > > _______________________________________________ > > LinuxVirtualServer.org mailing list - [email protected] > > Send requests to [EMAIL PROTECTED] > > or go to http://lists.graemef.net/mailman/listinfo/lvs-users > > > > > > -- > --------------- > Morpheus: After this, there is no turning back. You take the blue pill > - the story ends, you wake up in your bed and believe whatever you > want to believe. You take the red pill - you stay in Wonderland and I > show you how deep the rabbit-hole goes. > > _______________________________________________ > > LinuxVirtualServer.org mailing list - [email protected] > Send requests to [EMAIL PROTECTED] > or go to http://lists.graemef.net/mailman/listinfo/lvs-users > _______________________________________________ LinuxVirtualServer.org mailing list - [email protected] Send requests to [EMAIL PROTECTED] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
