On Tue, 22 Jul 2008, Joe wrote:
>Ratz's solution is on the director, and sets the MTU for the >route. I´ve to check this on our setup. >not sure what you're doing here. Is it one connection with >this route? Both "directors" are connected via GRE. The first director starts routing to the second one through the tunnel as soon as the realservers behind it aren´t available anymore. So it "turns off" the ipvsadm and switches itself to a routing instance. The second director, which also serves clients and servers at its location by ipvsadm, starts another ipvsadm instance on the GRE interface and is receiving routed packets from the first director through GRE tunnel. >client->director1->gre-tunnel->director2->realserver? >I assume you have two directors in some standard failover >setup and only one is directing when your LVS is up? It isn´t a typical failover scenario. On each location are two machines (master/slave). The failover I´m talking about is switching between datacenters. If the realservers after director1 at location 1 aren´t available anymore, the director1 starts normal routing operation through tunnel to the other director2 at location 2, which handles it´s own ipvsadm instances, clients and realservers. The director2 now serves client from location 1 with servers at location 2 through GRE Tunnel. >the copy has nothing to do with LVS? ie you can do the copy >when there is nothing in the ipvsadm table in the 2nd >(inactive) director, but as soon as you put entries into >ipvsadm on the backup director, the gre tunnel breaks? Making a connection from client n, location 1, to an address on director 1, the director1 routes the packets through the tunnel to location 2. Without running ipvsadm on director 2, location2, the connection establishes correctly and the a 600Kb file transfer works fine. Starting ipvsadm on the gre interface of director2, location2, makes the file transfer hang due to mtu issues, I presume. All instances on ipvsadm breaks the tunnel except if a client connects before to the realserver directly as is explained in the "update" email, I sent previously. It´s strange but it think I´m getting closer. Thanks for your help. Marco _______________________________________________ LinuxVirtualServer.org mailing list - [email protected] Send requests to [EMAIL PROTECTED] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
