Hello: It seems that VIP 65.103.190.107 on my LVS is NOT responding!
I have setup a simple LVS. Two Virtual servers (vs1.tib.com & vs2.tib.com) and one Real Server (rs1.tib.com) on CentOS 5.3. Now when I trying to display a test Web site (on rs1), the request times out. On vs1 there is nothing in the logs. No error message. Just nothing. From VS1, I can display any outside (http://www.msn.com) but can't display internal web (http://www.tib.com) pages. I have a hunch that the virtual setting for HTTP in piranha-gui is not correct. But what? After two days, I need direction. =========================== /etc/sysconfig/ha/lvs.cf serial_no = 17 primary = 65.103.190.106 primary_private = 192.168.1.1 service = lvs backup_active = 1 backup = 65.103.190.108 backup_private = 192.168.1.2 heartbeat = 1 heartbeat_port = 539 keepalive = 6 deadtime = 18 network = nat nat_router = 192.168.1.254 eth1:1 nat_nmask = 255.255.255.0 debug_level = NONE monitor_links = 0 syncdaemon = 0 virtual HTTP { active = 1 address = 65.103.190.107 eth0:1 vip_nmask = 255.255.255.248 port = 80 send = "GET / HTTP/1.0\r\n\r\n" expect = "HTTP" use_regex = 0 load_monitor = none scheduler = wlc protocol = tcp timeout = 6 reentry = 15 quiesce_server = 0 server rs1 { address = 192.168.1.10 active = 1 weight = 1000 } } _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
