Hy Folks i am using eth0, eth2 and serial
my ha.cf looks so debugfile /var/log/ha-debug logfile /var/log/ha-log logfacility local0 keepalive 2 warntime 5 deadtime 10 udpport 694 bcast eth1 eth2 baud 19200 serial /dev/ttyS0 auto_failback on node lbcisxx01 node lbcisxx02 debug 1 each node has a special pool configured in haresources, so the load was mixed on both 2 nodes my Heartbeat (node1 and node2) is running well, is there a problem on one node so the second node will handle the rest from the pool. i mean ... if on one node heartbeat are dead or machine was offline so the other node will make the takeover but i searching for a way to fix the following! I will configure the nodes that in case of , eth0 or eth2 are dead, the second node will handle the pool. or If with the serial cable connection have problems so also the other aktive node will handle ..... what is the best way to konfigure this ? Thanks (great project :) ) _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
