Linuz:
I am working on setting up LVS using Piranah. I have really good notes, whic will save you few months of pulling hair. Contact me directly: [email protected] and I will email them to you. Kirt ===================================== linuz linuz wrote: > Hi > > Can anybody help me for LVS configuration for below mentioned setup. > > I have 6 RHEL5 machines. > > s1, s2 and LVS ip( lvs servers and lvsip (VIP)in one network - > 192.168.10.0). > s3,s4 with one VIP (realservers) for port 80 and s5,s6 (realservers) with > one VIP for port 3306 in another 192.168.20.0 network. > > I need to setup > > one lvs server serves on port 80 to s1 and s2 and from s1 and s2 it should > connect to second LVS which load balance the db network for port 3306. > Here LVS(directors) is in 192.168.10.0 network and all real servers in > another 192.168.20.0 network. > > Am using rhel5 piranha with ipvsadm for LVS. I used lvs tun configuration > but its not working. > Plz help me for the same. > _______________________________________________ > Please read the documentation before posting - it's available at: > http://www.linuxvirtualserver.org/ > > LinuxVirtualServer.org mailing list - [email protected] > Send requests to [email protected] > or go to http://lists.graemef.net/mailman/listinfo/lvs-users > > _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
