Hello LVS Users, It's been a while since I've used LVS-DR and I'm having some difficulties. I've read http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.arp_problem.htm several times now, specifically: http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.arp_problem.html#2_6_arp_announce
In the past I recall using lo:0 or dummy0:0 and the hidden patch. My current machines are running kernels 2.6.24. I've set the VIP IP on the realserver to be on eth1 (the second unused NIC in the server) I then manually ran sysctl for each of these: net.ipv4.conf.eth0.arp_ignore = 1 net.ipv4.conf.eth0.arp_announce = 2 net.ipv4.conf.all.arp_ignore = 1 net.ipv4.conf.all.arp_announce = 2 And everything looked good. I went ahead and configured my ubuntu machine's /etc/network/interfaces to bring up eth1 automatically which worked fine. When I put the above sysctl commands in /etc/sysctl.conf though, the machine didn't come back from a reboot. I thought there may have been a type, so I tried on a second machine, which also didn't come back from a reboot. Not sure what state they are in, I need to head down to the colo and get them back up. Am I doing something wrong? What could cause the above behavior? Thanks, Philip _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
