Ferenc Wagner <wf...@niif.hu> writes: > If I add an IPv4 network to the loopback device, that answers all > addresses in the network, which is convenient on the fwmark-based > director (with a corresponding static network route configured on the > upstream router). These altogether make VIP-less director possible. > > But if I try to do the same with IPv6, no dice. If I add an IPv6 > network to the loopback device, that does NOT answer all the addresses > in the network, and even if I add a local route for the network, that > shows up as unreachable in the routing table listing. > > Is it possible to employ some trick to "localize" a network of IPv6 > addresses, so that IPVS catches and routes them?
Looks like the Any-IP support added to 2.6.37 solves this with utter elegance: 'ip route add PREFIX dev lo' is enough in itself. At least until the IPVS hook moves into FORWARD... -- Regards, Feri. _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org Send requests to lvs-users-requ...@linuxvirtualserver.org or go to http://lists.graemef.net/mailman/listinfo/lvs-users
