i have installed the keepalived.below:
./configure && make && make install
------------------------------------------------------------
vip : 172.16.39.100
keepalived lvs lb(master) 172.16.39.10
keepalived lvs lb(backup) 172.16.39.20
real server1 172.16.39.30
real server2 172.16.39.40
--------------------------------------------------------------
keepalived.conf of lb master server
global_defs {
router_id LVS_DEVEL_M
}
vrrp_instance websev {
state MASTER
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
172.16.39.100
}
}
virtual_server 172.16.39.100 80 {
delay_loop 6
lb_algo rr
lb_kind TUN
persistence_timeout 10
protocol TCP
real_server 172.16.39.30 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 172.16.39.40 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
then , i start the keepalived daemon
----------------------------------------------------------------
real server 1 command line below:
ifconfig tunl0 172.16.39.100 netmask 255.255.255.0 up
route add -host 172.16.39.100 dev tunl0
echo "1" >/proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/tunl0/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p
---------------------------------------------------------------
but , the lvs (load balance) doesn't work
2011/3/8 Graeme Fowler <gra...@graemef.net>
> On Tue, 2011-03-08 at 09:05 +0800, bedo wrote:
> > if I want to use the lvs function of keepalived.
> > i must install ipvsadm?
>
> No, you don't. However you won't be able to monitor your LVS very easily
> if you don't install it.
>
> Graeme
>
>
> _______________________________________________
> Please read the documentation before posting - it's available at:
> http://www.linuxvirtualserver.org/
>
> LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org
> Send requests to lvs-users-requ...@linuxvirtualserver.org
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
>
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org
Send requests to lvs-users-requ...@linuxvirtualserver.org
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
