Greetings All, I have a working setup of one director and two real servers. All servers are running and pulse daemon starts fine. I can HTTP, FTP, and SSH to all servers. The "virtual server" is behind a router/firewall that handles real/public to local IPs.
I suspect I have something backwards somewhere. Here is the setup/config. D01 (director): http://208.90.226.39/ (no backup yet) P01 (real # 1): http://208.90.226.30/ P02 (real # 2): http://208.90.226.31/ ------------------------------------------------------------------------ Topology: ---------- | internet | | | ---------- | | ---------- | router | 208.90.226.39 -> 198.168.10.39 (director) | | | | 208.90.226.30 -> 198.168.10.30 (real server #1) | | 208.90.226.31 -> 198.168.10.31 (real server #2) ---------- | | ---------- | director | -VIP:198.168.11.39 | | -RIP:198.168.10.39 (eth0) ---------- | | | -------------------------- | | | | ---------- ---------- | real | | real | ---------- ---------- 192.168.10.30 192.168.10.31 RIP/eth0 RIP/eth0 BOTH REAL SERVERS: (VIP:198.168.11.39) ip route add 198.168.11.39 dev eth0 arptables -A IN -d 198.168.11.39 -j DROP arptables -A OUT -s 198.168.11.39 -j mangle --mangle-ip-s 198.168.10.39 service arptables_jf restart service pulse start pulse[19058]: STARTING PULSE AS MASTER pulse[19058]: partner dead: activating lvs avahi-daemon[3167]: Registering new address record for 198.168.11.39 on eth0. lvs[19068]: starting virtual service Director-80 active: 80 kernel: IPVS: [wlc] scheduler registered. lvs[19068]: create_monitor for Director-80/Proxy-1 running as pid 19084 lvs[19068]: create_monitor for Director-80/Proxy-2 running as pid 19085 nanny[19085]: starting LVS client monitor for 198.168.11.39:80 -> 192.168.10.31:80 nanny[19084]: starting LVS client monitor for 198.168.11.39:80 -> 192.168.10.30:80 nanny[19084]: [ active ] making 192.168.10.30:80 available nanny[19085]: [ active ] making 192.168.10.31:80 available pulse[19070]: gratuitous lvs arps finished ipvsadm -ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 198.168.11.39:80 wlc persistent 14400 -> 192.168.10.30:80 Route 1 0 0 -> 192.168.10.31:80 Route 1 0 0 BUT... no load balancing. Surf to : http://208.90.226.39/index.html and you get "D01" Should switch between: "P01" and "P02", right?? ( http://208.90.226.30/index.html == "P01" / http://208.90.226.31/index.html == "P02" ) --RayJ PS: /etc/sysconfig/ha/lvs.cf serial_no = 302 primary = 192.168.10.39 service = lvs backup = 0.0.0.0 heartbeat = 1 heartbeat_port = 539 keepalive = 6 deadtime = 18 network = direct debug_level = NONE virtual Director-80 { active = 1 address = 198.168.11.39 eth0:1 vip_nmask = 255.255.255.0 port = 80 persistent = 14400 pmask = 255.255.255.255 send = "GET / HTTP/1.1\r\n\r\n" expect = "HTTP" use_regex = 0 load_monitor = none scheduler = wlc protocol = tcp timeout = 30 reentry = 15 quiesce_server = 1 server Proxy-1 { address = 192.168.10.30 active = 1 weight = 1 } server Proxy-2 { address = 192.168.10.31 active = 1 weight = 1 } } _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
