I have a problem with testing LWIP (1.1.0) with the unix simhost program
on FreeBSD 5.3 wich seems not related
to lwip, but with the working of the tap0 Interface.
System 1:
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.15.47.115 netmask 0xfffff000 broadcast 10.15.47.255
inet6 fe80::204:75ff:fef8:5f08%xl0 prefixlen 64 scopeid 0x1
ether 00:04:75:f8:5f:08
media: Ethernet autoselect (10baseT/UTP)
status: active
System 2:
This system also runs lwip:
IP4_ADDR(&gw,10,15,46,199)
IP4_ADDR(&ipaddr,10,15,46,200)
IP4_ADDR(&netmask,255,255,255,0)
so ifconfig shows:
bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 10.15.47.238 netmask 0xfffff000 broadcast 10.15.47.255
inet6 fe80::20b:cdff:fef3:d40c%bge0 prefixlen 64 scopeid 0x1
ether 00:0b:cd:f3:d4:0c
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
inet6 fe80::2bd:25ff:fe73:8600%tap0 prefixlen 64 scopeid 0x4
inet 10.15.46.199 netmask 0xffffff00 broadcast 10.15.46.255
ether 00:bd:25:73:86:00
Opened by PID 34228
When I ping from system 1 to 10.15.46.200 (the simhost app) and look at
the tap0 traffic on System 2:
15:33:13.393676 IP 10.15.47.115 > 10.15.46.200: icmp 64: echo request
seq 60674
0x0000: 4500 0054 d1b2 0000 4001 369e 0a0f 2f73
[EMAIL PROTECTED]/s
0x0010: 0a0f 2ec8 0800 46e4 0fb1 ed02 27a2 b243
......F.....'..C
0x0020: ec7e 0300 0809 0a0b 0c0d 0e0f 1011 1213
.~..............
0x0030: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
.............!"#
0x0040: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233
$%&'()*+,-./0123
0x0050: 3435 3637 4567
15:33:13.394016 IP 10.15.46.200 > 10.15.47.115: icmp 64: echo reply seq
60674
0x0000: 4500 0054 d1b2 0000 4001 369e 0a0f 2ec8
[EMAIL PROTECTED]
0x0010: 0a0f 2f73 0000 4ee4 0fb1 ed02 27a2 b243
../s..N.....'..C
0x0020: ec7e 0300 0809 0a0b 0c0d 0e0f 1011 1213
.~..............
0x0030: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
.............!"#
0x0040: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233
$%&'()*+,-./0123
0x0050: 3435 3637 4567
Everything looks alright, however on the bge0 interface the reply from
lwip is missing:
15:34:42.268409 IP 10.15.47.115 > 10.15.46.200: icmp 64: echo request
seq 17667
0x0000: 4500 0054 d20a 0000 4001 3646 0a0f 2f73
[EMAIL PROTECTED]/s
0x0010: 0a0f 2ec8 0800 f4d9 0fb1 4503 80a2 b243
..........E....C
0x0020: 8f88 0100 0809 0a0b 0c0d 0e0f 1011 1213
................
0x0030: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
.............!"#
0x0040: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233
$%&'()*+,-./0123
0x0050: 3435 3637 4567
15:34:43.278318 IP 10.15.47.115 > 10.15.46.200: icmp 64: echo request
seq 17923
0x0000: 4500 0054 d20b 0000 4001 3645 0a0f 2f73
[EMAIL PROTECTED]/s
0x0010: 0a0f 2ec8 0800 4fb3 0fb1 4603 81a2 b243
......O...F....C
0x0020: 32af 0100 0809 0a0b 0c0d 0e0f 1011 1213
2...............
0x0030: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
.............!"#
0x0040: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233
$%&'()*+,-./0123
0x0050: 3435 3637 4567
It looks like FreeBSD doesn't want to route the outgoing traffic from
the tap0 interface to the physical bge0 interface.
(I also tried a direct ping to System 1, from withing simhost, but these
messages don't show up on the bge0 interface neither. Anyone with
experience on FreeBSD got some hints?
Regards,
Henk Dijkstra
_______________________________________________
lwip-users mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/lwip-users
