i found a solution... but i "forced" stack implementation guidelines...
I did a post to lwip_dev with this idea... because i need a feedback... here
a copy.
"
Hi all.
I found a solution for my problem, but i need community feedback.
The problem is:
I have my ip board, and i need to simplify the installer work.
So, in a business LAN with a DHCP server, the idea is to have FW which
starts, as default, with DHCP client enabled, get an IP to himself, and the
installer can read the IP using
'ping <nomeHOST>' (i used code found in forum for NBNS.. very good code!!!
Thanks Alain!)
After this, a professional installer could decide tho disable DHCP client
and use a fixed IP, through our SW which changes IP board setting.
Ok... but the problem happens if the installer put the board in a small LAN
without DHCP or try to connect it directly to his pc using eth cable.
In this case i need a fixed IP.
I tried to use a net interface with fixed IP, and after start DHCP client...
in my company LAN DHCP server doesn't answer (or routers block broadcast
packet with src IP different than 0.0.0.0)
So, my solution, is:
- create TWO interfaces on the same HW, one with fixed IP and one with DHCP
on and ip = 0.0.0.0
- i changed code in ethernetif scheleton, in function ethernetif_input() in
this way:
...
switch (htons(ethhdr->type)) {
#if PPPOE_SUPPORT
/* PPPoE packet? */
case ETHTYPE_PPPOEDISC:
// not implemented additional code
case ETHTYPE_PPPOE:
// not implemented additional code
#endif /* PPPOE_SUPPORT */
/* IP or ARP packet? */
case ETHTYPE_ARP:
/* test*/
// create a copy of pbuf for each netif. ONLY for ARP packet
for( netifCurr = netifLocal; netifCurr != NULL; netifCurr =
netifCurr->next )
{
ptemp = pbuf_alloc(PBUF_RAW, p->tot_len, PBUF_POOL);
if (ptemp != NULL)
{
#if ETH_PAD_SIZE
pbuf_header(ptemp, -ETH_PAD_SIZE); // drop the padding word
#endif
pbuf_copy(ptemp, p);
// full packet send to tcpip_thread to process
if (netifCurr->input(ptemp, netifCurr)!=ERR_OK)
{
LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: ARP input error\n"));
pbuf_free(ptemp);
ptemp = NULL;
}
}
}
pbuf_free(p); // free original pbuf
break;
//
case ETHTYPE_IP:
/* full packet send to tcpip_thread to process */
// if there are multiple interface on the same emac hw, send to first
interface
// ip layer will route packets to correct netif
if (netifLocal->input(p, netifLocal)!=ERR_OK)
{
LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n"));
pbuf_free(p);
p = NULL;
}
ret = TRUE;
break;
default:
pbuf_free(p);
p = NULL;
break;
}
return(ret);
...
so.. now i duplicate ARP packets and send a copy of each interface, and use
always the first interface for IP packet, because IP layer route packet
between interfaces
In this way, until board gets IP from DHCP, it answers using fixed IP, after
it answers using dynamic IP
Any comment??
"
2008/12/16 Alain M. <[email protected]>
> The real question is: do you really want to do that? what if you connect 2
> cameras, what happens? plus the problem on another message...
>
> IMHO, this would work better:
> try DHCP for some time, withou any ip, then use autoip...
>
> Alain
>
> Piero 74 escreveu:
>
> Hi all
>>
>> I tested a network camera, which seems work in this way:
>>
>> it has a DHCP client inside, which starts on power on. But until an IP
>> from DHCP server is available, it answers on fixed ip (i.e. 192.168.1.3)
>>
>> Can i do the same using lwip?
>>
>> I tried to bring up an interface with fixed IP and after start DHCP, but
>> it doesn't work: i didn't receive a new ip address from DHCP server.
>>
>> I saw DHCP traffic using wireshark: in normal situation, DHCP client sends
>> packet from 0.0.0.0 to broadcast, and the server answers, in my situation i
>> have DHCP request from 192.168.1.3 to broadcast...
>> i suppose this could be the problem
>>
>> Any idea??
>>
>> Thanks,
>> Piero
>>
>
>
> _______________________________________________
> lwip-users mailing list
> [email protected]
> http://lists.nongnu.org/mailman/listinfo/lwip-users
>
_______________________________________________
lwip-users mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/lwip-users
