It looks, that not defined UDP bufs.
In your lwipopts.h commented out:
//#define LWIP_UDP 1
#define LWIP_UDP 1
//#define MEMP_NUM_UDP_PCB 4
#define MEMP_NUM_UDP_PCB 5
Need uncomment ---------- ARP options ----------
You not using tcp, so comment
#define LWIP_TCP 0
#define MEMP_NUM_TCP_PCB 0// default is 5
Read opt.h for more information...
----- Original Message -----
From: Jin Won Seo
To: Mailing list for lwIP users
Sent: Friday, September 20, 2013 8:07 PM
Subject: Re: [lwip-users] lwip bind fail
Thanks,
It's my misunderstanding. Telnet doesn't let me check if UDP Server's IP port
is alive.
Anyhow, I can't still figure the main problem out.
Why is lwip_socket() not working?
socket_fd = lwip_socket(AF_INET, SOCK_DGRAM, 0) always return -1.
I put a debugging codes to see get a connection in lwip_socket() in sockets.c
if (!conn) {
DisplayString(115, 180 - 10, " ENOBUFS (could not create netconn) ");
LWIP_DEBUGF(SOCKETS_DEBUG, ("-1 / ENOBUFS (could not create netconn)\n"));
set_errno(ENOBUFS);
return -1;
}
and display "ENOBUFS...." on LCD.
lwip_socket_init() is called in different task, which is lwip_task, and
listener task sets up socket and receives packets.
lwip_task init lwip and calls lwip_socket_init()
// Initialize lwIP.
//
//get client IP and use it to set up socket later on
lwIPInit(pucMAC, 0, 0, 0, IPADDR_USE_DHCP);
//
// Setup the remaining services inside the TCP/IP thread's context.
//
tcpip_callback(SetupServices, 0);// lwip_socket_init() is called in
SetupServices().
I was suspicious about lwipopts.h, so kept changing definition and tested to
see if I missed one of definition in the header file. However, it still doesn't
work.
I attached my lwipopts.h.
Thanks,
Jin
On Thu, Sep 19, 2013 at 10:53 PM, Darius Babrauskas <[email protected]> wrote:
>>Also I directly attempts to access the listener using telnet
command(telnet 192.2.0.208 5701), but the below error message comes out
Telnet using TCP protocol. Your server type are UDP. Connection not
possible.
----- Original Message -----
From: Jin Won Seo
To: Mailing list for lwIP users
Sent: Friday, September 20, 2013 12:41 AM
Subject: Re: [lwip-users] lwip bind fail
Hi,
I put a debugging code to see what error no spits out.
if (!conn) {
DisplayString(115, 180 - 10, " ENOBUFS (could not create netconn)
");
LWIP_DEBUGF(SOCKETS_DEBUG, ("-1 / ENOBUFS (could not create
netconn)\n"));
set_errno(ENOBUFS);
return -1;
}
" ENOBUFS (could not create netconn) " was displayed on LCD. The meaning
of ENOBUFS is /* No buffer space available */
I think it just says that no connection is made up.
I don't know what makes this happened, but I feel like something to do
with configuration to use lwip-socket since not even lwip-socket conn is
assigned.
Anyone knows about this?
On Thu, Sep 19, 2013 at 11:42 AM, Jens Nielsen <[email protected]> wrote:
Hi
Did you check the value of socket_fd? lwip_socket() returns -1 on error
but your code tests for == 0
Also check the value of errno after your call, that might give you a
hint
BR /Jens
On 2013-09-19 20:19, Jin Won Seo wrote:
Hi all,
I posted my issue but I fell like not describing the problem in
detail. So I re-post it with detail information.
I am testing listener modules using LM3S9B96, lwip1.3.2, safeRTOS,
StellarisWare 10636, ccs 5.4.x.
The listener task running on safeRTOS basically receives message from
server daemon in Unix using socket(UDP).
As the server daemon sends messages, the listener seems like not
getting anything from the server
Also I directly attempts to access the listener using telnet
command(telnet 192.2.0.208 5701), but the below error message comes out
"telnet : Unable to connect to remote host: Connection refused"
My test scenario is :
1. Get an IP from Server(Unix) using DHCP
//
// Initialize lwIP.
//
lwIPInit(pucMAC, 0, 0, 0, IPADDR_USE_DHCP);
//
// Setup the remaining services inside the TCP/IP thread's
context.
//
tcpip_callback(SetupServices, 0);
2. Init lwip socket in SetupServices().
lwip_socket_init();
3. Create listener task to receive packets from server daemon(UDP).
int socket_fd;
struct sockaddr_in sa, ra;//sa = sender addr, ra= receiver addr
NET_MSG *sMsg;
int length;
u32_t size;
size = sizeof(sa);
// addr_setup();
// portTickType xTime1, xTime2;
// Setup the local address.
memset((char *) &ra, 0, sizeof(ra));
ra.sin_family = AF_INET;
ra.sin_len = sizeof(ra);
// ra.sin_addr.s_addr = lwIPLocalIPAddrGet();
ra.sin_addr.s_addr = inet_addr("192.2.0.208");
ra.sin_port = htons(S_PORT);//#define S_PORT 5701
//setup the destination address
memset((char *) &sa, 0, sizeof(sa));
sa.sin_family = AF_INET;
sa.sin_len = sizeof(sa);
sa.sin_addr.s_addr = inet_addr("192.2.0.3");// for test,
hard-corded
// sDestAddr.sin_addr.s_addr = chgd_in_addr();
sa.sin_port = htons(S_PORT);
while((socket_fd = lwip_socket(AF_INET, SOCK_DGRAM, 0)) == 0)
{
DisplayString(115, 210 - 10, " lwip socket error... ");
//xTaskDelay(CHGD_OPEN_TIME);
xTaskDelay(SECONDS(5));//arbitrary time for test
}
//bind socket to the local address and port
if(lwip_bind(socket_fd, (struct sockaddr *) &ra, sizeof(ra)) ==
-1)
{
lwip_close(socket_fd);
DisplayString(115, 190 - 10, " bind error... ");//Display
message on LCD in LM3S9B96
}
while(1)
{
//receive from server
length = lwip_recvfrom(socket_fd, (char *) msg_buf,
sizeof(msg_buf),
MSG_DONTWAIT, (struct sockaddr *)&sa, &size);
if(length > 0)
{
sMsg = (NET_MSG *) (msg_buf);
mon_cmd_do(socket_fd, &sa, sMsg, length);
}
lwip_close(socket_fd);
xTaskDelay(1);// 1ms tick delay
}
As the program is executed, it seems like not binding socket properly
since "bind error..." is displayed on LCD.
Here is my lwipopts.h
#define SYS_LIGHTWEIGHT_PROT 1 // default is 0
#define NO_SYS 0 // default is 0
#if !NO_SYS
#define RTOS_SAFERTOS 1
#define RTOS_FREERTOS 0
#endif /* !NO_SYS */
#define MEMP_NUM_PBUF 64
#define MEMP_NUM_TCP_PCB 40
#define MEMP_NUM_TCP_SEG 48
#define MEMP_NUM_SYS_TIMEOUT 10
#define PBUF_POOL_SIZE 64
#define IP_REASSEMBLY 0 // default is 1
#define IP_FRAG 0 // default is 1
#define LWIP_DHCP 1
#define LWIP_AUTOIP 1 // default is 0
#define LWIP_DHCP_AUTOIP_COOP ((LWIP_DHCP) && (LWIP_AUTOIP))
// default is 0
#define LWIP_DHCP_AUTOIP_COOP_TRIES 5 // default is 9
#define TCP_WND 4096 // default is 2048
#define TCP_MSS 1500 // default is 128
//#define TCP_CALCULATE_EFF_SEND_MSS 1
#define TCP_SND_BUF (6 * TCP_MSS)
// default is 256
#define TCP_SND_QUEUELEN (MEMP_NUM_TCP_SEG)
#define PBUF_LINK_HLEN 16 // default is 14
#define PBUF_POOL_BUFSIZE 256
// default is
LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)
#define ETH_PAD_SIZE 2 // default is 0
#define TCPIP_THREAD_NAME "tcpip_thread"
#define TCPIP_THREAD_STACKSIZE 1024
#define TCPIP_THREAD_PRIO 3
#define TCPIP_MBOX_SIZE 32
#define LWIP_NETCONN 1 // default is 1
//*****************************************************************************
//
// ---------- Socket Options ----------
//
//*****************************************************************************
#define LWIP_SOCKET 1 // default is 1
#define LWIP_COMPAT_SOCKETS 0
#define LWIP_POSIX_SOCKETS_IO_NAMES 0
#define LWIP_TCP_KEEPALIVE 0
#define LWIP_SO_RCVTIMEO 0
#define LWIP_SO_RCVBUF 0
#define SO_REUSE 0
#define LWIP_PROVIDE_ERRNO 1 //Add for lwip
socket errors
#define LWIP_STATS_LARGE 1
#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_OFF
#define LWIP_DBG_TYPES_ON
(LWIP_DBG_ON|LWIP_DBG_TRACE|LWIP_DBG_STATE|LWIP_DBG_FRESH)
So far I don't see any clues to figure this out.
If anyone can help me out, I will appreciate that.
Thank,
Jin
_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users
_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users
--------------------------------------------------------------------------
_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users
_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users
------------------------------------------------------------------------------
_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users
