Hi, Patrick. > -----Original Message----- > From: lwip-users > On Behalf Of Patrick Klos > Sent: Wednesday, 10 August 2016 16:26 > On 8/9/2016 12:21 PM, Greg Smith wrote: > > I am running an RS485 bus, so I could hook another device in to > > "listen" to all the traffic. Unfortunately, that's going to get me a > > lot of bytes, but minimal decoding. Do you know of any good tools > > where I could dump raw bytes and get packet decoding back out? (Or > > even a tool to hang on the serial line and decode live?) > > If you can tap the serial lines and feed them to 2 COM ports on a Windows > machine (XP or 7), I can rig up a version of PacketView Pro (our Windows based > protocol analyzer) for you to use to decode the packets (no charge).
This could be most helpful! It will take me several days to get a rig together to get the bytes into the PC (i.e. I'll probably have to order a couple high-speed RS485<->USB converters). But if you have a decoding tool I could try, I will find a way to get it done. > Or if you have packets in the form of raw bytes, I could help you decode them. > Just post or email them. I might try this as a fallback, if I can capture the bytes in a meaningful way. -- G --------------------------------------------------------------------------------------- This email has been scanned for email related threats and delivered safely by Mimecast. For more information please visit http://www.mimecast.com ---------------------------------------------------------------------------------------
_______________________________________________ lwip-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/lwip-users
