Hi,
We are finding error in udp send like no route after connection of
getting ip form ppp connect. i attached log please give some suggestions
to solve it.
thanks
parwath
On 2017-07-21 05:36, Sylvain Rochet wrote:
Hi,
On Fri, Jul 21, 2017 at 05:32:22AM -0700, [email protected]
wrote:
(...)
sys_timeout: 0x21001308 msecs=6000 handler=(fsm_timeout)
arg=0x21001290
Are you sure your timer port is working ? sys_timeout() is called but
it seems that scheduled timeout functions are never actually called.
Sylvain
_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users
800 Executing AT+CGDCONT=1,"IP","airtelgprs.com"
933
OK
sys_timeout: 0x21000008 msecs=1000 handler=cyclic_timer arg=0x20212d14
netif: IP address of interface set to 0.0.0.0
netif: netmask of interface set to 255.255.255.255
netif: GW address of interface set to 0.0.0.0
netif: added interface pp IP
addr
0.0.0.0
netmask
255.255.255.255
gw
0.0.0.0
ppp phase changed[0]: phase=0
31 Executing ATD*99***1#
169
CONNECT
netif: setting default interface ''
ppp_connect[0]: holdoff=0
ppp phase changed[0]: phase=3
pppos_connect: unit 0: connecting
ppp_start[0]
ppp phase changed[0]: phase=6
pppos_send_config[0]: out_accm=FF FF FF FF
ppp_send_config[0]
pppos_recv_config[0]: in_accm=FF FF FF FF
ppp_recv_config[0]
ppp: auth protocols:
PAP=1
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5851f42d> <pcomp> <accomp>]
pppos_write[0]: len=24
sys_timeout: 0x210012f0 msecs=6000 handler=(fsm_timeout) arg=0x210000d0
ppp_start[0]: finished
pppos_input[0]: got 55 bytes
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth 0xc223 05> <magic 0x52181044>
<pcomp> <accomp>]
lcp_reqci: returning CONFNAK.
sent [LCP ConfNak id=0x1 <auth pap>]
pppos_write[0]: len=12
pppos_input[0]: got 46 bytes
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x5851f42d> <pcomp> <accomp>]
pppos_input[0]: got 53 bytes
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth pap> <magic 0x52181044> <pcomp>
<accomp>]
lcp_reqci: returning CONFACK.
sent [LCP ConfAck id=0x2 <asyncmap 0x0> <auth pap> <magic 0x52181044> <pcomp>
<accomp>]
pppos_write[0]: len=28
netif_set_mtu[0]: mtu=1500
pppos_send_config[0]: out_accm=0 0 0 0
ppp_send_config[0]
pppos_recv_config[0]: in_accm=0 0 0 0
ppp_recv_config[0]
ppp phase changed[0]: phase=7
sent [PAP AuthReq id=0x1 user=" " password=" "]
pppos_write[0]: len=12
sys_timeout: 0x210012f0 msecs=6000 handler=(upap_timeout) arg=0x21000088
pppos_input[0]: got 13 bytes
rcvd [PAP AuthAck id=0x1 ""]
PAP authentication succeeded
ppp phase changed[0]: phase=9
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0>]
pppos_write[0]: len=20
sys_timeout: 0x21001308 msecs=6000 handler=(fsm_timeout) arg=0x21001290
sct calling h=cyclic_timer arg=0x20212d14
tcpip: etharp_tmr()
sys_timeout: 0x21000008 msecs=1000 handler=cyclic_timer arg=0x20212d14
sct calling h=cyclic_timer arg=0x20212d14
tcpip: etharp_tmr()
sys_timeout: 0x21000008 msecs=1000 handler=cyclic_timer arg=0x20212d14
sct calling h=cyclic_timer arg=0x20212d14
tcpip: etharp_tmr()
sys_timeout: 0x21000008 msecs=1000 handler=cyclic_timer arg=0x20212d14
sct calling h=cyclic_timer arg=0x20212d14
tcpip: etharp_tmr()
sys_timeout: 0x21000008 msecs=1000 handler=cyclic_timer arg=0x20212d14
sct calling h=cyclic_timer arg=0x20212d14
tcpip: etharp_tmr()
sys_timeout: 0x21000008 msecs=1000 handler=cyclic_timer arg=0x20212d14
sct calling h=cyclic_timer arg=0x20212d14
tcpip: etharp_tmr()
sys_timeout: 0x21000008 msecs=1000 handler=cyclic_timer arg=0x20212d14
sct calling h=(upap_timeout) arg=0x21000088
sct calling h=(fsm_timeout) arg=0x21001290
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0>]
output cb
pppos_write[0]: len=20
sys_timeout: 0x210012f0 msecs=6000 handler=(fsm_timeout) arg=0x21001290
pppos_input[0]: got 12 bytes
rcvd [IPCP ConfReq id=0x1]
ipcp: returning Configure-NAK
sent [IPCP ConfNak id=0x1 <addr 0.0.0.0>]
pppos_write[0]: len=14
sct calling h=cyclic_timer arg=0x20212d14
tcpip: etharp_tmr()
sys_timeout: 0x21000008 msecs=1000 handler=cyclic_timer arg=0x20212d14
pppos_input[0]: got 36 bytes
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>]
pppos_write[0]: len=14
sys_timeout: 0x210012f0 msecs=6000 handler=(fsm_timeout) arg=0x21001290
rcvd [IPCP ConfReq id=0x2 <addr 192.200.1.21>]
ipcp: returning Configure-ACK
sent [IPCP ConfAck id=0x2 <addr 192.200.1.21>]
pppos_write[0]: len=14
pppos_input[0]: got 18 bytes
rcvd [IPCP ConfNak id=0x2 <addr 100.92.92.233>]
sent [IPCP ConfReq id=0x3 <addr 100.92.92.233>]
output cb
pppos_write[0]: len=14
sys_timeout: 0x210012f0 msecs=6000 handler=(fsm_timeout) arg=0x21001290
pppos_input[0]: got 18 bytes
rcvd [IPCP ConfAck id=0x3 <addr 100.92.92.233>]
ipcp: up
sifvjcomp[0]: VJ compress enable=0 slot=0 max slot=0
netif: netmask of interface pp set to 255.255.255.255
netif: GW address of interface pp set to 192.200.1.21
netif_set_ipaddr: netif address being changed
netif: IP address of interface pp set to 100.92.92.233
sifup[0]: err_code=0
status_cb: Connected
our_ipaddr = 254.255.255.234
his_ipaddr = 254.255.255.234
netmask = 254.255.255.234
udp_bind(ipaddr =
100.92.92.233
, port = 0)
udp_bind: bound to
100.92.92.233
, port 49153)
udp_connect: connected to
14.96.79.16
, port 8888)
udp_send
ip4_route: No route to 14.96.79.16
udp_send: No route to
14.96.79.16
ERROR -4
_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users
