Hi, I am working with STM32F7 with LwIP 2.02 + FreeRTOS 9
D and I cache are enabled. TX/RX descriptors are hard coded inside DTCM. We have no problems for now. Most of the rest of LwIP init is as it was in older projects that used the STM32F4 I strongly suggest upgrading to LwIP 2.02 or even 2.03 BR, Noam. -----Original Message----- From: lwip-users [mailto:lwip-users-bounces+noam=silrd....@nongnu.org] On Behalf Of Jochen Strohbeck Sent: Thursday, November 30, 2017 2:10 PM To: lwip-users@nongnu.org Subject: [lwip-users] Problem running lwip on cortex M7 with D cache enabled Hello, I'm using lwip 1.4.1 and FreeRTOS on a SAME70 custom board with success if D-cache is disabled. If I enable the D-cache no more packets are received. If I place the RX descriptor into a non-cacheable region I get packets again but the received data is corrupt. Here is the lwip output: Checksum (0xa5fd) failed, IP packet dropped. IP (len 96) is longer than pbuf (len 50), IP packet dropped. I understand that I have to move the receive (and send) buffers which are used by the GMAC DMA to a non-cacheable region too. And here is where my problem starts. In my understanding these buffers are by default in an lwip memory pool. If I simply place the entire memory pool to non-cacheable region the CPU hangs up. I guess this is due to the D-cache requirements that the (GMAC) DMA buffer must be aligned to 32bytes but I don't know how to modify the lwip code in such a way that the receive buffer (pbuf->payload?) is 32byte aligned. The other (and better?) way would be to separate the receive buffer (or pbuf->payload) from the lwip memory pool so I can place it everywhere I want but I don't know how to manage this. Probably there is a better way to do so in lwip ? Any help is welcome. _______________________________________________ lwip-users mailing list lwip-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/lwip-users _______________________________________________ lwip-users mailing list lwip-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/lwip-users
