That doesn't seem completely correct. Per your later image, it seems you need
the IP header to contain proto = ESP, not proto = TCP...
Yes , i did change proto to 50, IPH_PROTO_SET(iphdr, proto);
But you must also check it, not only remove it, don't you?
Sure, Currently I'm Just trying to add/remove header .
No, that doesn't seem correct. pbuf_header only moves the payload pointer,
the data is still where it was before. You'll need to fiddle around with the
data or create new pbufs to achieve what you want.If you wanted to implement
this without changing the stack, you'd need some kind of new hook (as Sergio
mentioned) to add the header and change the IP protocol.For RX, it might be
enough to implement a raw pcb that detects the IP proto = ESP, checks and
hides the header and sends the remaining pbuf up to tcp_input().
I got it.
Thanks
--
Sent from: http://lwip.100.n7.nabble.com/lwip-users-f3.html
_______________________________________________
lwip-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/lwip-users
