Hello, was 1.) also a question? I would not start a new design with a controller which is not recommended for new designs. Take a look at the NXP iMX1060 which is faster and quite new. You can get examples with lwIP in there SDK from here: https://mcuxpresso.nxp.com/en/select
Best Regards -----Ursprüngliche Nachricht----- Von: lwip-users <[email protected]> Im Auftrag von sanjayks Gesendet: Donnerstag, 2. Mai 2019 11:23 An: [email protected] Betreff: [lwip-users] lwIP on a Microcontroller with two MACs Hi All, I am new to lwIP. I have a requirement in front of me. Please guide me where to look for. Requirement: 1. I need a card with two ethernet ports. ( Two PHY, two MACs and two IP addresses). The hardware designer suggested Atmel SAM9X25 which has two PHYs. 2. I do not see a port of lwIP for SAM9X25. 3. Where do I start from? Can I start with a lwIP port for any SAM series of Atmel and add my own ethernet driver which can handle two MACs ? 4. Are there any specific things that need to be handled when I try to use lwIP on a microcontroller with two PHYs. Please suggest what to look for and where to look for. Shall do the necessary hardwork myself :). Regards, Sanjay -- Sent from: http://lwip.100.n7.nabble.com/lwip-users-f3.html _______________________________________________ lwip-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/lwip-users _______________________________________________ lwip-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/lwip-users
