Hi Tomek, what is your target platform? ________________________________________ From: lwip-users <lwip-users-bounces+mrluzeiro=ua...@nongnu.org> on behalf of tomek wilkxt <wil...@gmail.com> Sent: 27 September 2019 08:39 To: Mailing list for lwIP users Subject: Re: [lwip-users] Status of snmp v3
Hi A few days ago I started snmpv3 from this example and is work fine. Only i have my private mib file. czw., 26 wrz 2019 o 21:07 Dirk Ziegelmeier <d...@ziegelmeier.net> napisał(a): > > sorry, I don't have an idea at the moment. I only tested with SnmpB and that > worked well. > > Ciao > Dirk > > > On Thu, Sep 26, 2019 at 1:10 PM Mário Luzeiro <mrluze...@ua.pt> wrote: >> >> Hi Dirk, >> >> > it is technically complete >> thanks for all your work! >> I missed a bit some debug output as there are on other modules in LWIP but I >> am doing some manual debug. >> >> >> I'm trying to run the example code with v3 and use snmpwalk (linux tool) to >> test it. >> I changed the engine boot and time to be always 0 for test proposes. >> I need to change the engineID to 12 octets(bytes) so snmpwalk (and >> wireshark) will not complain. >> >> The far I can get is running this command and get this result: >> $ snmpwalk -v3 -l authPriv -u lwip -a SHA -A "maplesyrup" -x DES -X >> "maplesyrup" 192.168.1.3 -e 555555555555555555555555 -Z 0,0 >> iso.3.6.1.2.1.1.1.0 = STRING: "lwIP example" >> iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.26381 >> iso.3.6.1.2.1.1.3.0 = Timeticks: (100158) 0:16:41.58 >> iso.3.6.1.2.1.1.4.0 = STRING: "root" >> iso.3.6.1.2.1.1.5.0 = STRING: "FQDN-unk" >> iso.3.6.1.2.1.1.6.0 = STRING: "lwIP development PC" >> iso.3.6.1.2.1.1.7.0 = INTEGER: 72 >> iso.3.6.1.2.1.2.1.0 = INTEGER: 1 >> iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1 >> snmpwalk: Authentication failure (incorrect password, community or key) >> >> Why is it getting some data and then in the end reports some authentication >> failure? >> As I don't know about SNMP protocol, I am not sure if thats ok or something >> is wrong.. >> Hope you can clarify me. >> >> Mario Luzeiro >> >> ________________________________________ >> From: lwip-users <lwip-users-bounces+mrluzeiro=ua...@nongnu.org> on behalf >> of Dirk Ziegelmeier <d...@ziegelmeier.net> >> Sent: 24 September 2019 19:18 >> To: Mailing list for lwIP users >> Subject: Re: [lwip-users] Status of snmp v3 >> >> it is technically complete, it only needs proper implementation of the >> functions in >> http://git.savannah.nongnu.org/cgit/lwip.git/tree/contrib/examples/snmp/snmp_v3/snmpv3_dummy.c >> >> which is the glueing code to your application. >> >> And of course it needs mbedtls in your project, or a reimplentation of >> http://git.savannah.nongnu.org/cgit/lwip.git/tree/src/apps/snmp/snmpv3_mbedtls.c >> >> Ciao >> Dirk >> >> >> On Tue, Sep 24, 2019 at 7:21 PM Mário Luzeiro >> <mrluze...@ua.pt<mailto:mrluze...@ua.pt>> wrote: >> Hello all, >> I'm testing SNMP sample from LWIP. >> >> What is the status of SNMP V3 implementation in LWIP? >> It only misses the user callback implementation or is missing something in >> the core? >> >> I tried to build with V3 enabled and I got errors on the use of >> mbedtls_sha1* and mbedtls_md5* functions. >> Am I missing some define? >> >> Mario >> _______________________________________________ >> lwip-users mailing list >> lwip-users@nongnu.org<mailto:lwip-users@nongnu.org> >> https://lists.nongnu.org/mailman/listinfo/lwip-users >> >> _______________________________________________ >> lwip-users mailing list >> lwip-users@nongnu.org >> https://lists.nongnu.org/mailman/listinfo/lwip-users > > _______________________________________________ > lwip-users mailing list > lwip-users@nongnu.org > https://lists.nongnu.org/mailman/listinfo/lwip-users -- pozdrawiam tomek _______________________________________________ lwip-users mailing list lwip-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/lwip-users _______________________________________________ lwip-users mailing list lwip-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/lwip-users
