Hi Danish,
On Thu, Feb 06, 2020 at 10:30:31AM +0000, Danish Ali wrote:
> I have LWIP 2.1.2 running using PPPOS through a 4G modem.
>
> I now want to route the PPPOS via CMUX mode so that I can receive SMS
> messages while leaving the PPP link up.
>
> Although this largely works, I find it less reliable than without the CMUX
> wrapper, so I thought I might check if the PPP layer was rejecting anything
> as garbled.
>
> Looking through ppp.h and ppp.c it seems there is an option
> PPP_STATS_SUPPORT which would collect statistics on the link. But if I
> #define PPP_STATS_SUPPORT 1 in lwipopts.h then compilation fails in ipcp.c
> with the error
> > netif/ppp/ipcp.c:2096:23: error: 'fsm' {aka 'struct fsm'} has no member
> named 'unit'
> > netif/ppp/ipcp.c:2129:24: error: 'fsm' {aka 'struct fsm'} has no member
> named 'unit'
>
> The offending lines are
> >#if PPP_STATS_SUPPORT
> > reset_link_stats(f->unit);
> >#endif /* PPP_STATS_SUPPORT */
>
> >#if PPP_STATS_SUPPORT
> > /* XXX a bit IPv4-centric here, we only need to get the stats
> > * before the interface is marked down. */
> > /* XXX more correct: we must get the stats before running the notifiers,
> > * at least for the radius plugin */
> > update_link_stats(f->unit);
> >#endif /* PPP_STATS_SUPPORT */
>
> Do you have any suggestions as to how I could either fix this or use an
> alternative way to monitor the PPP process.PPP_STATS_SUPPORT is a leftover from pppd, it is not meant to be enabled. Use LINK_STATS instead. Best, enable PPP_DEBUG + PRINTPKT_SUPPORT (+ PPP_PROTOCOLNAME) and you will get a trace with PPPoS input errors (FCS checks, ...). Sylvain
signature.asc
Description: Digital signature
_______________________________________________ lwip-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/lwip-users
