Hi,
I have been trying to use mqtt from lwip-2.1.2 alongwith mqtt and mbedtls.
Trying to connect to a running mosquitto on a PC (192.168.1.34)
I see that mqtt uses alttcp as a wrapper, which connects to mbedtls,
which uses lwip_tcp
But, looking at
void
mqtt_example_init(void)
{
#if LWIP_TCP
mqtt_client = mqtt_client_new();
mqtt_set_inpub_callback(mqtt_client,
mqtt_incoming_publish_cb,
mqtt_incoming_data_cb,
LWIP_CONST_CAST(void*, &mqtt_client_info));
mqtt_client_connect(mqtt_client,
&mqtt_ip, MQTT_PORT,
mqtt_connection_cb, LWIP_CONST_CAST(void*, &mqtt_client_info),
&mqtt_client_info);
#endif /* LWIP_TCP */
}
from contrib/mqtt_example.c, it gets connected over tcp.
Trying to connect using tcp, I get the following debug trace
IPv4 Address : 192.168.1.33
IPv4 Subnet mask : 255.255.255.0
IPv4 Gateway : 192.168.1.1
Lease period: 86400s, Renew in: 43200s, Rebind in: 75600s
(1150) mqtt_example_init: Initializing MQTT client
(1161) mqtt_example_init: Connecting to MQTT Broker:192.168.1.34:8883
tcp_bind: bind to port 52032
mqtt_client_connect: Connecting to host: 192.168.1.34 at port:8883
tcp_connect to port 8883
mqtt_tcp_connect_cb: TCP connection established to server
mqtt_output_send: tcp_sndbuf: 5840 bytes, ringbuf_linear_available:
18, get 0, put 18
mqtt_tcp_err_cb: TCP error callback: error -14, arg: 30044044
MQTT client "test" connection cb: status 256
tcp_pcb_purge
tcp_pcb_purge: data left on ->unacked
tcp_slowtmr: no active pcbs
(109) print_dhcp_state: Test MQTT publish
Assertion "mqtt_publish: TCP disconnected" failed at line 1110 in
D:\Work\LWIP\lwip-2.1.2\src\apps\mqtt\mqtt.c
(1219) publish_data: Publish err: -11
So, how should one connect MQTT when using mbedtls ?
Can someone help ?
Thanks,
Manu
_______________________________________________
lwip-users mailing list
lwip-users@nongnu.org
https://lists.nongnu.org/mailman/listinfo/lwip-users
