I made a TCP server on STM32F407 using lwIP version 2.1.2 and it worked fine. Now for some reasons I need to run a UDP server on the MCU. I tried and it worked fine for data size below 1472 bytes. Yet the desired data length is around 16KB to 20KB. 1. I searched and found that IP_FRAG should be defined 1 to allow send data over MTU size. It is enabled by default. I read from an email [1] that IP_FRAG_MAX_MTU should be also changed to a proper value. However I cannot realize where it is! 2. Another approach employed by me is to send chopped data whose size are below 1472 bytes in a for loop but the for loop only executes first time and the MCU goes stop status. How I must send data in a for loop?
[1] http://lwip.100.n7.nabble.com/Sending-a-large-amount-of-data-using-UDP-td35933.html
_______________________________________________ lwip-users mailing list lwip-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/lwip-users
