Hello, > I use the http://arduino.cc/en/Main/arduinoBoardUno and it has the 32Kb flash > and 2KB of RAM. There are versions that different hardware properties. >
For your information : http://mchck.org/ Best Regards, Guillaume FORTAINE On Sun, Jan 29, 2012 at 10:25 AM, Hannes Tschofenig <[email protected]> wrote: > Hi Joe, > > On Jan 25, 2012, at 12:52 AM, Joe Touch wrote: > >> >> >> On 1/24/2012 2:45 PM, Michael Richardson wrote: >>> >>> So, I think that these numbers are off. >>> >>> | Class 1 | ~ 10 KiB | ~ 100 KiB | >>> | Class 2 | ~ 50 KiB | ~ 250 KiB | >>> >>> In MSP430F54xx family of devices that I've spent most of the last year >>> working with, the smallest MSP430F5418 has 16KiB ram, 128K flash, while >>> the largest MSP430F5438 has 16KiB ram, and 256KiB flash. >> >> Arduinos have 32KB flash and 2KB RAM, and support WIFI and IPv4 (including >> DHCP, DNS, UDP, TCP, and a small web server). >> > > I am working with Arduino devices and there are obviously different types of > types available. > > I use the http://arduino.cc/en/Main/arduinoBoardUno and it has the 32Kb flash > and 2KB of RAM. There are versions that different hardware properties. > > It is interesting to note that I couldn't find an IPv6 implementation for > Arduino and, depending on your application needs, the available ram and flash > may not be sufficient. > > Ciao > Hannes > >> FYI. >> >> Joe >> >>> I suggest that class 2 double the flash value, as I think the 430 should >>> be class 1 only. A C64 is... class 2? >>> >>> I agree with need a class 0 device. >>> > > _______________________________________________ > Lwip mailing list > [email protected] > https://www.ietf.org/mailman/listinfo/lwip _______________________________________________ Lwip mailing list [email protected] https://www.ietf.org/mailman/listinfo/lwip
