Quoting Jiri Slaby (jsl...@suse.cz):
> From: Frederic Crozat <fcro...@suse.com>
>
> This adaptation of systemd. We also add network configuration support.
Is there any point in worrying about support for older versions?
(If not, that's fine)
> Jiri Slaby: cleanups, rebase
> ---
> templates/lxc-opensuse.in | 121
> +++++++++++++++++++++++-----------------------
> 1 file changed, 61 insertions(+), 60 deletions(-)
>
> diff --git a/templates/lxc-opensuse.in b/templates/lxc-opensuse.in
> index 56e93d7..32ff4ec 100644
> --- a/templates/lxc-opensuse.in
> +++ b/templates/lxc-opensuse.in
> @@ -25,7 +25,7 @@
> # License along with this library; if not, write to the Free Software
> # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>
> -DISTRO=12.1
> +DISTRO=12.2
>
> configure_opensuse()
> {
> @@ -34,39 +34,13 @@ configure_opensuse()
>
> # set network as static, but everything is done by LXC outside the
> container
> cat <<EOF > $rootfs/etc/sysconfig/network/ifcfg-eth0
> -STARTMODE='manual'
> +STARTMODE='auto'
> BOOTPROTO='none'
> EOF
>
> - # set default route
> - IP=$(/sbin/ip route | awk '/default/ { print $3 }')
> - echo "default $IP - -" > $rootfs/etc/sysconfig/network/routes
> -
> # create empty fstab
> touch $rootfs/etc/fstab
>
> - # create minimal /dev
> - mknod -m 666 $rootfs/dev/random c 1 8
> - mknod -m 666 $rootfs/dev/urandom c 1 9
> - mkdir -m 755 $rootfs/dev/pts
> - mkdir -m 1777 $rootfs/dev/shm
> - mknod -m 666 $rootfs/dev/tty c 5 0
> - mknod -m 600 $rootfs/dev/console c 5 1
> - mknod -m 666 $rootfs/dev/tty0 c 4 0
> - mknod -m 666 $rootfs/dev/tty1 c 4 1
> - mknod -m 666 $rootfs/dev/tty2 c 4 2
> - mknod -m 666 $rootfs/dev/tty3 c 4 3
> - mknod -m 666 $rootfs/dev/tty4 c 4 4
> - ln -s null $rootfs/dev/tty10
> - mknod -m 666 $rootfs/dev/full c 1 7
> - mknod -m 666 $rootfs/dev/ptmx c 5 2
> - ln -s /proc/self/fd $rootfs/dev/fd
> - ln -s /proc/kcore $rootfs/dev/core
> - mkdir -m 755 $rootfs/dev/mapper
> - mknod -m 600 $rootfs/dev/mapper/control c 10 60
> - mkdir -m 755 $rootfs/dev/net
> - mknod -m 666 $rootfs/dev/net/tun c 10 200
> -
> # set the hostname
> cat <<EOF > $rootfs/etc/HOSTNAME
> $hostname
> @@ -91,23 +65,6 @@ LOADER_TYPE=none
> LOADER_LOCATION=none
> EOF
>
> - # cut down inittab
> - cat <<EOF > $rootfs/etc/inittab
> -id:3:initdefault:
> -si::bootwait:/etc/init.d/boot
> -l0:0:wait:/etc/init.d/rc 0
> -l1:1:wait:/etc/init.d/rc 1
> -l2:2:wait:/etc/init.d/rc 2
> -l3:3:wait:/etc/init.d/rc 3
> -l6:6:wait:/etc/init.d/rc 6
> -ls:S:wait:/etc/init.d/rc S
> -~~:S:respawn:/sbin/sulogin
> -p6::ctrlaltdel:/sbin/init 6
> -p0::powerfail:/sbin/init 0
> -cons:2345:respawn:/sbin/mingetty --noclear console screen
> -c1:2345:respawn:/sbin/mingetty --noclear tty1 screen
> -EOF
> -
> # set /dev/console as securetty
> cat << EOF >> $rootfs/etc/securetty
> console
> @@ -121,10 +78,15 @@ EOF
>
>
> # remove pointless services in a container
> - chroot $rootfs /sbin/insserv -r -f boot.udev boot.loadmodules
> boot.device-mapper boot.clock boot.swap boot.klog kbd
> + ln -s /dev/null
> $rootfs/etc/systemd/system/proc-sys-fs-binfmt_misc.automount
> + ln -s /dev/null $rootfs/etc/systemd/system/console-shell.service
> + ln -s /dev/null $rootfs/etc/systemd/system/systemd-vconsole-setup.service
> + ln -s /lib/systemd/system/getty@.service
> $rootfs/etc/systemd/system/getty.target.wants/getty@console.service
> +
> + touch $rootfs/etc/sysconfig/kernel
>
> echo "Please change root-password !"
> - echo "root:root" | chroot $rootfs chpasswd
> + echo "root:root" | chpasswd -R $rootfs
>
> return 0
> }
> @@ -154,30 +116,45 @@ download_opensuse()
> zypper --quiet --root $cache/partial-$arch-packages --non-interactive ar
> http://download.opensuse.org/distribution/$DISTRO/repo/oss/ repo-oss
> zypper --quiet --root $cache/partial-$arch-packages --non-interactive ar
> http://download.opensuse.org/update/$DISTRO/ update
> zypper --quiet --root $cache/partial-$arch-packages --non-interactive
> --gpg-auto-import-keys update
> - zypper --root $cache/partial-$arch-packages --non-interactive in
> --auto-agree-with-licenses --download-only zypper lxc patterns-openSUSE-base
> sysvinit-init
> + zypper --root $cache/partial-$arch-packages --non-interactive in
> --auto-agree-with-licenses --download-only zypper lxc patterns-openSUSE-base
> iputils
> cat > $cache/partial-$arch-packages/opensuse.conf << EOF
> Preinstall: aaa_base bash coreutils diffutils
> -Preinstall: filesystem fillup glibc grep insserv libacl1 libattr1
> -Preinstall: libbz2-1 libgcc46 libxcrypt libncurses5 pam
> +Preinstall: filesystem fillup glibc grep insserv
> +Preinstall: libbz2-1 libgcc47 libncurses5 pam
> Preinstall: permissions libreadline6 rpm sed tar zlib libselinux1
> -Preinstall: liblzma5 libcap2 libpcre0
> +Preinstall: liblzma5 libcap2 libacl1 libattr1
> Preinstall: libpopt0 libelf1 liblua5_1
> +Preinstall: libpcre1
>
> RunScripts: aaa_base
>
> Support: zypper
> Support: patterns-openSUSE-base
> Support: lxc
> -Prefer: sysvinit-init
> -
> -Ignore: patterns-openSUSE-base:patterns-openSUSE-yast2_install_wf
> +Support: ncurses-utils
> +Support: iputils
> +Support: udev
> +Support: netcfg
> +Support: dhcpcd hwinfo insserv module-init-tools openSUSE-release openssh
> +Support: pwdutils rpcbind sysconfig rsyslog
> +
> +Ignore: rpm:suse-build-key,build-key
> +Ignore: systemd:systemd-presets-branding
> EOF
> + if [ "$arch" == "i686" ]; then
> + mkdir -p
> $cache/partial-$arch-packages/var/cache/zypp/packages/repo-oss/suse/i686/
> + for i in
> "$cache/partial-$arch-packages/var/cache/zypp/packages/repo-oss/suse/i586/*"
> ; do
> + ln -s $i
> $cache/partial-$arch-packages/var/cache/zypp/packages/repo-oss/suse/i686/
> + done
> + mkdir -p
> $cache/partial-$arch-packages/var/cache/zypp/packages/update/i686
> + for i in
> "$cache/partial-$arch-packages/var/cache/zypp/packages/update/i586/*" ; do
> + ln -s $i
> $cache/partial-$arch-packages/var/cache/zypp/packages/update/i686/
> + done
> + fi
>
> - CLEAN_BUILD=1 BUILD_ROOT="$cache/partial-$arch"
> BUILD_DIST="$cache/partial-$arch-packages/opensuse.conf"
> /usr/lib/build/init_buildsystem --clean --cachedir
> $cache/partial-$arch-cache --repository
> $cache/partial-$arch-packages/var/cache/zypp/packages/repo-oss/suse/$arch
> --repository
> $cache/partial-$arch-packages/var/cache/zypp/packages/repo-oss/suse/noarch
> + CLEAN_BUILD=1 BUILD_ARCH="$arch" BUILD_ROOT="$cache/partial-$arch"
> BUILD_DIST="$cache/partial-$arch-packages/opensuse.conf"
> PATH="$PATH:/usr/lib/build" /usr/lib/build/init_buildsystem --clean
> --configdir /usr/lib/build/configs --cachedir $cache/partial-$arch-cache
> --repository
> $cache/partial-$arch-packages/var/cache/zypp/packages/repo-oss/suse/$arch
> --repository
> $cache/partial-$arch-packages/var/cache/zypp/packages/repo-oss/suse/noarch
> --repository
> $cache/partial-$arch-packages/var/cache/zypp/packages/update/$arch
> --repository
> $cache/partial-$arch-packages/var/cache/zypp/packages/update/noarch
> chroot $cache/partial-$arch /usr/bin/zypper --quiet --non-interactive ar
> http://download.opensuse.org/distribution/$DISTRO/repo/oss repo-oss
> chroot $cache/partial-$arch /usr/bin/zypper --quiet --non-interactive ar
> http://download.opensuse.org/update/$DISTRO/ update
> - chroot $cache/partial-$arch rpm -e patterns-openSUSE-base
> - umount $cache/partial-$arch/proc
> # really clean the image
> rm -fr
> $cache/partial-$arch/{.build,.guessed_dist,.srcfiles*,installed-pkg}
> rm -fr $cache/partial-$arch/dev
> @@ -259,16 +236,40 @@ copy_configuration()
> rootfs=$2
> name=$3
>
> - # only disable network if no network configuration was passed
> - grep -q "^lxc.network.type" $path/config || echo 'lxc.network.type =
> empty' >> $path/config
> + if grep -q "^lxc.network.type" $path/config; then
> + TYPE=$(sed '/^#/d; /lxc.network.type/!d; s/.*=[ \t]*//' $path/config)
> + grep -q "^lxc.network.ipv4" $path/config
> + IPV4_NOT_CONFIGURED=$?
> +
> + if [ ! grep -q "^lxc.network.*.gateway" $path/config ]; then
> + [ $IPV4_NOT_CONFIGURED -eq 0 ] && IPV4=$(sed '/^#/d;
> /lxc.network.ipv4/!d; /gateway/d; s/.*=[ \t]*//;
> s/\([[:digit:]]\+\.[[:digit:]]\+\.[[:digit:]]\+\.[[:digit:]]\+\).*/\1/'
> $path/config)
> + if [ "$TYPE" = "veth" -o "$TYPE" = "macvlan" ]; then
> + if [ $IPV4_NOT_CONFIGURED -eq 0 -a "$IPV4" != "0.0.0.0" ]; then
> + # set default route
> + IP=$(/sbin/ip route | awk '/default/ { print $3 }')
> + echo "lxc.network.ipv4.gateway = $IP " >> $path/config
> + else
> + # set network as dhcp
> + sed -i -e 's/BOOTPROTO=.*/BOOTPROTO=dhcp/'
> $rootfs/etc/sysconfig/network/ifcfg-eth0
> + fi
> + fi
> + fi
> + if [ "$TYPE" != "empty" ]; then
> + echo "#remove next line if host DNS configuration should not be
> available to container" >> $path/config
> + echo "lxc.mount.entry = /etc/resolv.conf etc/resolv.conf none
> bind,ro 0 0" >> $path/config
> + fi
> + else
> + echo 'lxc.network.type = empty' >> $path/config
> + fi
>
> grep -q "^lxc.rootfs" $path/config 2>/dev/null || echo "lxc.rootfs =
> $rootfs" >> $path/config
> cat <<EOF >> $path/config
> lxc.utsname = $name
> -
> +lxc.autodev=1
> lxc.tty = 4
> lxc.pts = 1024
> lxc.mount = $path/fstab
> +lxc.cap.drop = sys_module mac_admin mac_override mknod
>
> # When using LXC with apparmor, uncomment the next line to run unconfined:
> #lxc.aa_profile = unconfined
> --
> 1.8.1.2
>
>
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_feb
_______________________________________________
Lxc-devel mailing list
Lxc-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/lxc-devel
