Pradeep your diagram doesn't provide any info on the network connections. What does ifconfig show for a network address and are they separate from the Hosts network address?
Nor do you say how you configured Floodlight. By default Floodlight uses "Reactive" Flow control where unknown pkt-in are sent to the controller but you can configure Floodlight for "Proactive" flow control where the controller pre-populates a "flow" to the switches.... when you installed the controller you would have had to make a config decision to change the default tho'. ---------- Forwarded message ---------- From: Pradeep Kiruvale <pradeepkiruv...@gmail.com> To: lxc-users@lists.linuxcontainers.org Cc: Date: Wed, 9 Apr 2014 13:16:49 +0200 Subject: [lxc-users] Lxc and OVS Hi All, For one of my project I have a setup as below openflow controller(floodlight controller) | openflow switch | ____ |_________ | | container1 container2 Everything setup perfectly and ping works from one container to the other and the from host to containers. But I am not receiving any messages in open-controller.They bypass the controller and communicated.As per the openflow protocol first message should come to controller and then install a flow and then they can communicate afterwards. Am I missing something here? Thanks & Regards, Pradeep
_______________________________________________ lxc-users mailing list lxc-users@lists.linuxcontainers.org http://lists.linuxcontainers.org/listinfo/lxc-users