Dear Guillaume,
from the output
> | my_container | RUNNING | 127.0.0.1 | ::1 |
I would say that the container don't have an adequate IP. And maybe no default
route to your gateway x.x.x.1, too. Should this be set by DHCP or by static
configuration?
Guido
On 12.03.2015 23:54, Guillaume VINCENT wrote:
> Hello list,
>
> I'm learning how to use lxd and play with my container.
>
> For know I can download images, launch some container.
>
> But I can't get my container reaching the outside world.
>
> My host /etc/network/interfaces :
>
> auto lo
> iface lo inet loopback
>
> # The primary network interface
> auto eth0
> iface eth0 inet dhcp
>
> auto lxcbr0
> iface lxcbr0 inet static
> address x.x.x.230
> netmask 255.255.255.0
> network x.x.x.0
> broadcast x.x.x.255
> gateway x.x.x.1
> bridge_ports eth0
> bridge_stp off
> bridge_fd 0
>
> brctl show
>
> bridge name bridge id STP enabled interfaces
> lxcbr0 8000.e89a8f509087 no eth0
>
> lxc list
>
> +--------------+---------+-----------+------+
> | NAME | STATE | IPV4 | IPV6 |
> +--------------+---------+-----------+------+
> | my_container | RUNNING | 127.0.0.1 | ::1 |
> +--------------+---------+-----------+------+
>
>
> lxc config show my_container
>
> Profiles: default
>
> lxc config profile edit default
>
> name: default
> config: {}
> devices:
> eth0:
> nictype: bridged
> parent: lxcbr0
> type: nic
>
>
> lxc exec my_container -- ping 8.8.8.8
>
> connect: Network is unreachable
>
>
> Any idea ? Any ressource I can read ?
>
> I've read lxc bridge setup post on the mailing list without any success
>
> Thank you
_______________________________________________
lxc-users mailing list
lxc-users@lists.linuxcontainers.org
http://lists.linuxcontainers.org/listinfo/lxc-users
