/etc/lxc/default.conf lxc.utsname =lsmb1 lxc.network.type=veth lxc.network.flags=up lxc.network.link=br0 lxc.network.hwaddr=ac:de:48:00:00:15 lxc.network.ipv4=10.0.0.15 lxc.id_map = u 0 100000 65536 lxc.id_map = g 0 100000 65536
/etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp auto br0 iface br0 inet static bridge_ports eth0 bridge_fd 0 address 10.0.0.15 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 gateway 10.0.0.1 bridge_maxwait 0 /var/lib/lxc/lsmb1/config # Distribution configuration lxc.include = /usr/share/lxc/config/debian.common.conf lxc.include = /usr/share/lxc/config/debian.userns.conf lxc.arch = x86_64 # Container specific configuration lxc.utsname = lsmb1 lxc.id_map = u 0 100000 65536 lxc.id_map = g 0 100000 65536 lxc.rootfs = /var/lib/lxc/lsmb1/rootfs lxc.utsname = lsmb1 # Network configuration lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.hwaddr = ac:de:48:00:00:15 lxc.network.ipv4 = 10.0.0.15/8 /var/lib/lxc/lsmb1/rootfs/etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp lxc-info -n lsmb1 Name: lsmb1 State: RUNNING PID: 3366 IP: 10.0.0.15 CPU use: 1.27 seconds BlkIO use: 92.30 MiB Link: vethQINE7U TX bytes: 2.25 KiB RX bytes: 19.37 KiB Total bytes: 21.62 KiB I can ping the container, and ssh from the container to another computer on the lan. I cannot access the WAN from the container when I ssh to the host from the container I get the hosts root@laptop:~# I find that strange lxc: Installed: 1:1.0.7-1 Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Debian Unstable So what is needed to connect to the internet and I will admit that my iptables-foo knowledge is severely lacking Thanks Geordie _______________________________________________ lxc-users mailing list [email protected] http://lists.linuxcontainers.org/listinfo/lxc-users
