Are you sure, you have enabled ipv6 forwarding via sysctl?
On 22 April 2016 at 18:10, Nick Falcone <[email protected]> wrote: > Hello > > I have been banging my head up against a wall for a few days now trying > to get IPv6 to work across my bridged interface for my containers. > > I have tried different VPS and dedicated servers as well as versions of > Ubuntu 14.04, 15.10, and 16.04 to get this working. The latest test all > this info is from an Ubuntu 16.04 with the included version of LXD. > > First I install and run lxd init, I configure the bridge like so. > > lxdbr0 Link encap:Ethernet HWaddr fe:82:af:f0:5d:ce > inet addr:10.195.87.1 Bcast:0.0.0.0 Mask:255.255.255.0 > inet6 addr: 2604:a880:0:1010::623:2/64 Scope:Global > inet6 addr: fe80::40c6:84ff:fe18:22fb/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:294 errors:0 dropped:0 overruns:0 frame:0 > TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:21612 (21.6 KB) TX bytes:2127 (2.1 KB) > > This is my host information too > > eth0 Link encap:Ethernet HWaddr 04:01:d4:50:c4:01 > inet addr:162.243.200.170 Bcast:162.243.200.255 > Mask:255.255.255.0 > inet6 addr: fe80::601:d4ff:fe50:c401/64 Scope:Link > inet6 addr: 2604:a880:0:1010::623:1/64 Scope:Global > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:76258 errors:0 dropped:0 overruns:0 frame:0 > TX packets:8187 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:111074998 (111.0 MB) TX bytes:1230729 (1.2 MB) > > I launch and enter the first container it has this info: > > eth0 Link encap:Ethernet HWaddr 00:16:3e:87:ff:20 > inet addr:10.195.87.69 Bcast:10.195.87.255 > Mask:255.255.255.0 > inet6 addr: 2604:a880:0:1010:216:3eff:fe87:ff20/64 > Scope:Global > inet6 addr: fe80::216:3eff:fe87:ff20/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:20 errors:0 dropped:0 overruns:0 frame:0 > TX packets:294 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:2175 (2.1 KB) TX bytes:25728 (25.7 KB) > > so here I can see slaac is successful, but I cannot ping6 > 2604:a880:0:1010::623:1 (the host ipv6), I cannot ping google's public > dns ipv6 either. I CAN successfully ping6 2604:a880:0:1010::623:2 my > bridge public IPv6. > > Seems like a routing issue, so on the host I add: > ip -6 route add 2604:a880:0:1010:216:3eff:fe87:ff20 dev lxdbr0 > > > Still not able to ping6 out. As a side note IPv4 works great. > > Am I missing something here? I cannot seem to find a lot of docs on this > small part. I thought to look at the demo containers on > https://linuxcontainers.org/lxd/try-it/ but am unable to ping6 out on > those, is this just a limitation? > > Thanks for any help in advance, would really like to use lxd for a > project. Also I do not care to redact these real IPs, they belong to a > box only used for getting this working then will be destroyed. > _______________________________________________ > lxc-users mailing list > [email protected] > http://lists.linuxcontainers.org/listinfo/lxc-users _______________________________________________ lxc-users mailing list [email protected] http://lists.linuxcontainers.org/listinfo/lxc-users
