Hi Everyone,
Here's my scenario. My host has 4 nics which are bonded (bond0). I want to have
different containers using different vlans. Here is my host interfaces file:
source /etc/network/interfaces.d/*
######################
# Loopback interface #
######################
auto lo
iface lo inet loopback
#######################
# Physical Interfaces #
#######################
auto eno1
iface eno1 inet manual
bond-master bond0
bond-primary eno1
auto eno2
iface eno2 inet manual
bond-master bond0
auto eno3
iface eno3 inet manual
bond-master bond0
auto eno4
iface eno4 inet manual
bond-master bond0
##########################
# BONDED NETWORK DEVICES #
##########################
auto bond0
iface bond0 inet manual
bond-mode 4
bond-slaves none
bond-miimon 100
bond-lacp-rate 1
bond-slaves eno1 eno2 eno3 eno4
bond-downdelay 200
bond-updelay 200
bond-xmit-hash-policy layer2+3
####################
# RAW VLAN DEVICES #
####################
iface bond0.100 inet static
vlan-raw-device bond0
iface bond0.101 inet static
vlan-raw-device bond0
iface bond0.102 inet static
vlan-raw-device bond0
iface bond0.103 inet static
vlan-raw-device bond0
##########################
# BRIDGE NETWORK DEVICES #
##########################
auto br0
iface br0 inet static
bridge_ports bond0
bridge_maxwait 10
address 10.9.0.188
netmask 255.255.0.0
broadcast 10.9.255.255
network 10.9.0.0
gateway 10.9.0.1
dns-nameservers 10.1.1.84 8.8.8.8
auto br0-100
iface br0-100 inet manual
bridge_ports bond0.100
bridge_stp off
bridge_fd 0
bridge_maxwait 0
auto br0-101
iface br0-101 inet manual
bridge_ports bond0.101
bridge_stp off
bridge_fd 0
bridge_maxwait 0
auto br0-102
iface br0-102 inet manual
bridge_ports bond0.102
bridge_stp off
bridge_fd 0
bridge_maxwait 0
auto br0-103
iface br0-103 inet manual
bridge_ports bond0.103
bridge_stp off
bridge_fd 0
bridge_maxwait 0
I have create a profile for a container to use vlan100 (br0-100)
config: {}
description: ""
devices:
eth0:
nictype: bridged
parent: br0-100
type: nic
root:
path: /
pool: default
type: disk
name: vlantest
used_by:
- /1.0/containers/v100
The interface file in my container:
source /etc/network/interfaces.d/*.cfg
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 10.9.100.101
netmask 255.255.255.0
network 10.9.100.0
gateway 10.9.100.1
broadcast 10.9.100.255
dns-nameservers 10.1.1.84
ifconfig in container:
eth0 Link encap:Ethernet HWaddr 00:16:3e:40:16:9c
inet6 addr: fe80::216:3eff:fe40:169c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1016 (1.0 KB) TX bytes:1192 (1.1 KB)
eth1 Link encap:Ethernet HWaddr 00:16:3e:42:12:66
inet6 addr: fe80::216:3eff:fe42:1266/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1700 (1.7 KB) TX bytes:508 (508.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
What am I doing wrong here? Container creates an additional interface for some
reason (eth1) but neither get addresses.
Best Regards,
Lai Wei-Hwa
IT Administrator
T. (514) 367-2252 ext 6308 C. (514) 218-7400 [ mailto:wh...@robco.com |
wh...@robco.com ]
Montreal - Toronto - Edmonton [ https://www.robco.com/ | www.robco.com ]
ISO 9001 / 14001
_______________________________________________
lxc-users mailing list
lxc-users@lists.linuxcontainers.org
http://lists.linuxcontainers.org/listinfo/lxc-users
