Hello
I have the following container network configuration:
lxc.network.type = veth
lxc.network.link = br0
lxc.network.flags = up
lxc.network.ipv4 = 192.168.0.2/24
lxc.network.name = eth0
When the container starts up, this is how its eth0 interface is
configured:
eth0 Link encap:Ethernet HWaddr 2e:bd:69:e3:ed:d3
inet addr:192.168.0.2 Bcast:192.168.0.0 Mask:255.255.255.0
inet6 addr: fe80::2cbd:69ff:fee3:edd3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1124 (1.1 KB) TX bytes:866 (866.0 B)
The broadcast address should be 192.168.0.255. Is there a way I can set
this?
Thanks
Andre
------------------------------------------------------------------------------
The modern datacenter depends on network connectivity to access resources
and provide services. The best practices for maximizing a physical server's
connectivity to a physical network are well understood - see how these
rules translate into the virtual world?
http://p.sf.net/sfu/oracle-sfdevnlfb
_______________________________________________
Lxc-users mailing list
Lxc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/lxc-users
