On 05/21/2011 09:43 AM, Marc Haber wrote: > Hi, > > I am trying to use IPv6 Stateless Autoconfguration on a bridge between > the lxc host and the lxc guest with the radvd running on the host. My > setup is as follows: > > The host has its eth0 connected to the Internet with both IPv6 and > IPv4 connectivity. There is a bridge interface where all lxc guests > are connected to: > lxc.network.type = veth > lxc.network.flags = up > lxc.network.link = br0 > lxc.network.name = eth0 > The host has an IPv6 /64 on br0 and is running a radvd service. For > IPv4 connectivity, an RFC1918 network is used and NATted by the host. > > Stateless autoconfiguration does not work on my guests: I see the > router advertisements come in on the guest's eth0, but the kernel > doesn't react to it. > > Is this an lxc limitation? How do I do IPv6 Stateless Autoconfig for > lxc guests? >
Is the guest's /proc/sys/net/ipv6/conf/eth0/accept_ra set ? ------------------------------------------------------------------------------ What Every C/C++ and Fortran developer Should Know! Read this article and learn how Intel has extended the reach of its next-generation tools to help Windows* and Linux* C/C++ and Fortran developers boost performance applications - including clusters. http://p.sf.net/sfu/intel-dev2devmay _______________________________________________ Lxc-users mailing list Lxc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/lxc-users
