On Tue, Nov 29, 2011 at 7:27 PM, Patrick Kevin McCaffrey <p...@uwm.edu> wrote: > > The host machine also runs as my router, as it has a 4 port ethernet card > (four subnets, DHCP running on each). However, I cannot SSH into my > container from another computer on the local network -- it is only accessible > via the host machine. If I try to SSH from another machine, it says "no > route to host." Additionally, the container does not have internet access. > If I try to ping, use wget or apt, I get connection errors. I'm assuming > these two problems are related. > > I've got my local network set up using Shorewall, and it works reasonably > well for everything else (the entire local network is on the "local" zone, > which is completely open). The host's etc/network/interfaces file sets up > the five ethernet interfaces (eth0-eth3 with static IPs and eth4 with DHCP > from the cable modem) as well as the bridge for lxc. The following is my > bridge entry:
it sounds to me like there really is "no route to host" ... the bridge is isolated from the other physical cards (ie, all other hosts), and there is probably not a route in the kernel providing access between, or access to the outside -- only the host can see the bridge interface. whats is output of `ip route` or `route -n`? do you have dhcp running on the bridge or is the LXC host assigned a static ip? -- C Anthony ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-novd2d _______________________________________________ Lxc-users mailing list Lxc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/lxc-users
