I came up with a issue about how to dual WAN router with two WiFi adapters that might see subnet collisions. The scenarios is this, say two generous neighbors will let me connect to their APs, both AP are connected to two different ISPs, but their LAN setups are using the same network/subnet. Example: IP: 192.168.1.1 Subnet: 255.255.255.0 DCHP range: 192.168.1.100-200. So from what I can see, LXC would allow me to setup containers for two of the WiFi adapters and bridge them to the main OS so then I could load balance the traffic between the two on the same box. The question is, can any give me some pointers on this? I want to do this as light as possible.
-- Kenneth Ellis McCall
<<attachment: dual_wan.png>>
------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________ Lxc-users mailing list Lxc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/lxc-users
