Hi All,
I'm using lxc in my project, I want to combine lxc with Linux bonding, so
I've tried do Linux bonding with *mode=6* on the host, the bonding
interface is *bond0*, whose SLAVE are *eth0* and *eth1* of the host. And I
use *macvlan* type by the "lxc.network.link = bond0" to link the host and
the container.
The network part of lxc configuration like this:
lxc.network.type = macvlan
lxc.network.flags = up
lxc.network.link = bond0
lxc.network. name = eth0
lxc.network.mtu = 1500
...
But, the problem is, when I use *ping* command inside the container, it
will lose about 80% packet! And if I change the bonding mode to others(ie.
0,1...) on the host, this problem will not occur any more.
Is there any one doing the same or similar thing like I do, and encountered
the problem?
Every helpful comment would be highly appreciated.
Regards,
Yao
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
_______________________________________________
Lxc-users mailing list
Lxc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/lxc-users
